How does Indus support contractor Material Approval Requests (MAR) with Iraqi ministries and supervising consultants?

For every item supplied under Division 01, Indus provides a comprehensive, engineer-stamped submittal binder containing the manufacturer's ISO 9001 certification, EN 10204 Type 3.1 Material Test Report (MTR), raw material origin certificates, dimensional CAD shop drawings, compliance matrices cross-referencing Iraqi ministerial specifications (MoCH/Amanat Baghdad), and international test reports (SGS/TÜV/WRAS/NSF). This enables contractor engineering teams to achieve rapid MAR approval without consulting delays.

How do your pipeline products withstand the high soil salinity and aggressive groundwater in southern Iraq?

In governorates like Basra, Dhi Qar, and Maysan where soil resistivity is low and sulfate/chloride concentrations are severe, we supply specialized corrosion-proof pipeline solutions. For ductile iron, we provide thick external Polyurethane coatings (EN 15189) or zinc-aluminum alloy with heavy epoxy finish, paired with internal high-alumina cement (EN 598). For trenchless and distribution mains, our non-metallic Glass-Reinforced Plastic (GRP) and high-density PE100-RC pipes are 100% immune to galvanic corrosion, eliminating cathodic protection requirements.

Can Indus provide certified factory hydrostatic testing and independent third-party inspection?

Yes. All ductile iron pipes, valves, and GRP spools undergo 100% hydro-testing at the factory according to ISO 2531, ISO 5208, and EN 12266-1. In addition, our Erbil Heavy Staging Yard features an on-site calibrated hydrostatic test bench. We routinely coordinate with third-party inspection agencies in Iraq—including SGS, TÜV Rheinland, Bureau Veritas, and Cotecna—to conduct pre-shipment or on-site witness testing as mandated by project tender documents.

What are delivery lead times from your Baghdad, Erbil, and Basra storage hubs?

Standard stocked items—including ductile iron gate valves, butterfly valves, pipeline repair clamps, electrofusion fittings, water meters, and chlorination chemicals—are available for same-day dispatch or 24-to-48 hour on-site flatbed delivery across all 18 governorates. For specialized large-bore pipelines (such as DN1600+ GRP or custom motorized penstocks), delivery is scheduled via direct break-bulk marine discharge through Umm Qasr or overland bonded transport.

How does Indus assist contractors during emergency pipeline bursts and municipal water network shutdowns?

We maintain dedicated emergency stock reserves of stainless steel pipeline repair clamps (DN50–DN1200), wide-tolerance universal stepped couplings (EN 14525), and ductile iron under-pressure tapping split sleeves. Our emergency logistics desk operates 24/7, providing immediate inventory release to municipal water directorates and emergency repair contractors across Baghdad, Erbil, and Basra.

What commercial payment structures and Letter of Credit (L/C) arrangements do you accept in Iraq?

Indus Industrial Group works through established Iraqi and international banking institutions, including the Trade Bank of Iraq (TBI) and regional commercial banks. We accommodate Letters of Credit (L/C), milestone progress payments tied to ministerial inspection approvals, and commercial project credit lines for pre-qualified Iraqi Grade-1 contracting enterprises.

Corporate Holding › Operating Divisions › SEC-01: Water & Wastewater

SEC-01 • DIVISION 01 Active National Tender Desk Federal Iraq & Kurdistan Logistics

Water & Wastewater

Indus Industrial Group Operating Division 01 (Water & Wastewater) serves as Iraq's premier integrated engineering procurement channel for municipal drinking water distribution networks, deep sewer trunklines, irrigation canals, and industrial wastewater treatment plants. Encompassing 24 specialized sourcing categories and 134 certified master B2B products, Division 01 provides turnkey material packages engineered in strict compliance with the Iraqi Ministry of Construction, Housing, Municipalities and Public Works, Amanat Baghdad (Baghdad Water Authority), the Ministry of Water Resources (MoWR), and international engineering standards (ISO, EN, AWWA, DIN, ASTM).

Division Engineering Takeaways

AI-Overview & AEO Ready

Division Sourcing Scope: Turnkey industrial division incorporating 24 master category lines and 134 active commercial equipment specifications.
Pre-Qualification & Standards: ISO 2531 / EN 545 • EN 598 • ISO 4427 • EN 1796 / ISO 10639 / AWWA C950 • ISO 10467 / EN 14364 | Ministry of Construction, Housing, Municipalities and Public Works (وزارة الإعمار والإسكان والبلديات والأشغال العامة)
Logistics Footprint: Strategic heavy inventory staging across: Baghdad Central Logistics Depot (Abu Ghraib / Camp Sarah Industrial District, Baghdad); Erbil Heavy Infrastructure Staging Yard (Makhmur Road / Gwer Industrial Corridor, Erbil); Basra Port Gateway & Free Zone Terminal (Khor Al-Zubair & Umm Qasr Commercial Free Zone, Basra)

24

Sourcing Categories

Specialized Commodity Lines

134

Master B2B Products

With Complete Technical Specs

11

Verified Standards

ISO 2531 / EN 545 • EN 598 • ISO 4427 • EN 1796 / ISO 10639 / AWWA C950

6

Ministry Approvals

Pre-Qualified for Public Tenders

grid_view Explore 24 Sourcing Lines & Products upload_file Upload BOQ Specs WhatsApp Desk

verified Pre-Qualified by Iraqi Authorities: Ministry of Construction, Housing, Municipalities and Public Works • Amanat Baghdad - Baghdad Water & Sewerage Directorates • Ministry of Water Resources • General Directorate of Water & Sewerage - KRG • Basra Water Directorate

check_circle Quality Certifications: ISO 2531 / EN 545 • EN 598 • ISO 4427 • EN 1796 / ISO 10639 / AWWA C950 • ISO 10467 / EN 14364 • GRI

local_shipping Nationwide Tendering & Job-Site Delivery (All 19 Governorates): Baghdad, Erbil, Basra, Sulaymaniyah, Duhok, Halabja, Kirkuk, Nineveh, Anbar, Najaf, Karbala, Babil, Wasit, Maysan, Dhi Qar, Muthanna, Qadisiyyah, Saladin, Diyala.

Division Procurement Directory

Division 01 Sourcing Lines (24 Categories)

Select an engineering category line to explore complete metric ranges, standard compliances, CAD submittals, and product datasheets.

LINE 01 OF 24 7 Products

Ductile Iron Pipes

Centrifugally cast ductile iron pressure pipes manufactured to EN 545 and ISO 2531 standards, available in nominal diameters DN80 to DN2600 with Class C40, C30, or C25 pressure rat...

Primary Commodities in Stock:

Line #	Sourcing Line & Scope	Master Commodities Sample	Active Products	Procurement Action
L-01	Ductile Iron Pipes Centrifugally cast ductile iron pressure pipes manufactured to EN 545 and ISO 2531 standards, available in nominal diameters DN80 to DN2600 ...	Class C Potable Water Ductile Iron Pipes (DN80–DN2600, C25–C100, EN 545 / ISO 2531) Sewer & Wastewater Ductile Iron Pipes (DN80–DN2600, HAC / Polyurethane Lined, EN 598) High-Pressure Pumping Main Ductile Iron Pipes (DN100–DN2000, Class K9 / K10 / K12, ISO 2531)	7	Open Line →
L-02	HDPE PE100 Pressure Pipes High-density polyethylene PE100 pressure piping systems conforming to ISO 4427 and EN 12201 standards, available in diameters 20mm to 1200mm...	Municipal Potable Water PE100 Pressure Pipes (OD 20mm–1200mm \| PN6–PN25 \| SDR 26–SDR 7.4) Natural Gas Distribution PE100 Polyethylene Pipes (OD 20mm–630mm \| MOP Up to 10 Bar \| SDR 11–SDR 17.6) PE100-RC Crack-Resistant Trenchless Pipes (OD 63mm–1000mm \| PAS 1075 Type 1/2/3 \| SDR 11–SDR 17)	8	Open Line →
L-03	uPVC Underground Pipes Unplasticized polyvinyl chloride gravity and pressure underground pipes manufactured to EN 1401-1 and DIN 8062 specifications, offered in di...	Solvent-Weld uPVC Pressure Pipes (DN20–DN400, PN6–PN25, ISO 1452 / DIN 8062) Rubber-Ring Jointed uPVC Water Mains (DN63–DN630, PN10–PN25, EN ISO 1452) Solid-Wall uPVC Underground Sewer Pipes (DN110–DN630, SN4 / SN8, EN 1401-1)	5	Open Line →
L-04	Corrugated Sewer Pipes Double-wall structured twin-corrugated HDPE and PP gravity sewer pipes compliant with EN 13476-3 standards, featuring inner smooth bores and...	Double-Wall Corrugated HDPE Gravity Sewer Pipes (DN150–DN1200, SN8 / SN10, EN 13476-3) Steel-Reinforced Spiral Corrugated HDPE Sewer Pipes (DN300–DN2600, SN12.5 / SN16, ASTM F2562) Perforated Corrugated HDPE Subsurface Drainage Pipes (DN100–DN600, SN4/SN8, ASTM F405)	5	Open Line →
L-05	HDPE Electrofusion Fittings Molded PE100 electrofusion couplers, 90-degree elbows, equal tees, and tapping saddles produced in accordance with ISO 4427-3 and EN 12201-3...	HDPE Electrofusion Couplers (DN20–DN800, SDR11 / SDR17, EN 12201-3 / ISO 4427) HDPE Electrofusion Tapping Saddles & Branch Saddles (DN40–DN400, SDR11, ISO 4427) HDPE Electrofusion 45° & 90° Elbows (DN25–DN400, SDR11 / PN16, EN 12201-3)	6	Open Line →
L-06	HDPE Butt Fusion Fittings Injection-molded and spigot fabricated PE100 butt fusion fittings conforming to DIN 16963 and ISO 4427 standards, spanning OD 63mm to 1000mm...	Seamless Spigot HDPE Elbows 45° & 90° (DN63–DN800, SDR11 / SDR17, ISO 4427 / EN 12201) HDPE Flange Adaptors & Stub Ends (DN50–DN1200, SDR11 / SDR17 with Galvanized Backing Rings) HDPE Butt Fusion Equal & Reducing Spigot Tees (DN63–DN800, SDR11 / SDR17, EN 12201-3)	6	Open Line →
L-07	Ductile Iron Flanged Fittings Sand-cast and lost-foam ductile iron fittings comprising bends, tees, concentric reducers, and duckfoot elbows manufactured to EN 545 and IS...	All Flanged Ductile Iron Equal & Reducing Tees (DN80–DN2000, PN10 / PN16 / PN25, EN 545) Ductile Iron Dismantling Joints (DN80–DN2200, PN10 / PN16 / PN25 / PN40, EN 545) Double Flanged 90° & 45° Ductile Iron Bends (DN80–DN2000, PN10 / PN16 / PN25, EN 545)	6	Open Line →
L-08	Resilient Gate Valves Soft-seated resilient wedge gate valves manufactured according to BS 5163 Type B and EN 1171 specifications, featuring non-rising stainless ...	DIN 3352 F4 Short Body Resilient Seated Gate Valves (DN50–DN600, PN10 / PN16 / PN25, EN 1074) Underground Direct-Burial Gate Valves with Extension Spindles (DN50–DN500, PN16, EN 1074) DIN 3352 F5 Long Body Resilient Seated Gate Valves (DN50–DN800, PN10 / PN16 / PN25, EN 1171)	5	Open Line →
L-09	Flanged Butterfly Valves Double-eccentric flanged butterfly valves built to EN 593 and ISO 10631 standards with ductile iron body construction, stainless steel 316 d...	Double Eccentric Flanged Butterfly Valves (DN100–DN2400, PN10 / PN16 / PN25, EN 593) Concentric Rubber-Lined Flanged Butterfly Valves (DN50–DN1200, PN10 / PN16, EN 593) Lug & Wafer Type Resilient Seated Butterfly Valves (DN50–DN600, PN10 / PN16, EN 593)	5	Open Line →
L-10	Kinetic Air Valves Triple-function combination air release and vacuum relief valves produced to EN 1074-4 and AWWA C512 standards in sizes DN50 to DN300, rated...	Triple-Function Combination Kinetic Air Release Valves (DN50–DN300, PN16 / PN25 / PN40, EN 1074-4) Sewage & Wastewater Kinetic Air Release Valves (DN50–DN200, Non-Clog Stainless Float, EN 1074-4) High-Capacity Surge-Alleviating Air Release Valves (DN80–DN300, Non-Slam Mechanism, PN16 / PN25)	5	Open Line →
L-11	Non-Return Check Valves Silent swing and tilting disc non-return check valves manufactured to BS EN 12334 standards with ductile iron body construction, stainless s...	Resilient Swing Check Valves with Lever & Counterweight (DN50–DN1000, PN10 / PN16 / PN25, EN 1074-3) Non-Slam Nozzle Silent Check Valves (DN100–DN1200, PN16 / PN25 / PN40, EN 12334) Dual Plate Wafer Check Valves (DN50–DN1200, PN16 / PN25, API 594 / EN 12334)	5	Open Line →
L-12	Pressure Reducing Valves Pilot-operated diaphragm-actuated hydraulic pressure reducing valves conforming to EN 1074-5 and AWWA C530 standards, fabricated in ductile ...	Pilot-Operated Hydraulic Pressure Reducing & Sustaining Valves (DN50–DN600, PN16/PN25, AWWA C530) High-Differential Piston-Type Pressure Reducing Valves (DN50–DN300, PN25 / PN40, Severe Service) Direct-Acting Diaphragm Pressure Reducing Valves (DN15–DN100, PN16 / PN25, Threaded & Flanged)	5	Open Line →
L-13	Municipal Fire Hydrants Dry-barrel and wet-barrel ductile iron outdoor fire hydrants compliant with BS 750 and EN 14384 Type C specifications, rated for working pre...	Pillar-Type Dry Barrel Fire Hydrants (DN100 / DN150, PN16, AWWA C502 / EN 14384 Breakable Traffic Flange) Underground Fire Hydrants with Companion Duckfoot Bends (DN80 / DN100, PN16, BS 750 Type 2 / EN 14339) Wet Barrel Municipal Fire Hydrants (DN100 / DN150, PN16, Multi-Outlet BS 750 / Storz Couplings)	5	Open Line →
L-14	Submersible Sewage Pumps Heavy-duty non-clog submersible wastewater and sewage pumps built to ISO 9906 Grade 2B standards, featuring single-channel or vortex impelle...	Heavy-Duty Non-Clog Submersible Sewage Pumps (DN80–DN600, 1.5 kW–250 kW, Cast/Ductile Iron, IP68) Submersible Grinder & Cutter Sewage Pumps (DN40–DN100, 1.5 kW–15 kW, High-Torque Shredder Impeller) High-Flow Submersible Stormwater Axial-Flow Propeller Pumps (DN300–DN1200, 15 kW–315 kW, IP68)	5	Open Line →
L-15	End-Suction Water Pumps Horizontal centrifugal end-suction booster pumps manufactured in accordance with ISO 2858 and EN 733 dimensions, delivering flow capacities ...	Horizontal End-Suction Centrifugal Water Pumps (DN32–DN300, ISO 2858 / EN 733, 1.1 kW–200 kW) Axially Split-Case Double-Suction High-Flow Water Pumps (DN150–DN800, 37 kW–800 kW, ISO 9905) Vertical In-Line High-Pressure Multistage Booster Pumps (DN25–DN150, 0.75 kW–75 kW, SS304/SS316)	8	Open Line →
L-16	Pipeline Repair Clamps Single, double, and triple-band stainless steel AISI 304/316 repair clamps conforming to AWWA C230 specifications, lined with waffled EPDM o...	Single-Band Stainless Steel Pipeline Repair Clamps (DN50–DN300, Lengths 200–500mm, SS304 / SS316, PN16) Multi-Band Wide-Tolerance Stainless Steel Repair Clamps (DN200–DN1200, Lengths 300–800mm, PN10–PN25) Ductile Iron Split Repair Sleeves & Encapsulation Clamps (DN80–DN600, PN16 / PN25, High Pressure)	5	Open Line →
L-17	Ductile Iron Manhole Covers Heavy-duty municipal cast ductile iron manhole covers and frames certified to EN 124 Class D400 (40-ton) and Class E600 (60-ton) load rating...	Class D400 Heavy Highway Ductile Iron Manhole Covers (Clear Opening 600mm / 700mm / 800mm, EN 124-2) Watertight & Gastight Bolted Ductile Iron Pressure Manhole Covers (Clear Opening 600mm / 800mm, EN 124-2) Class F900 Airport Runway & Heavy Industrial Ductile Iron Covers (Clear Opening 600mm / 800mm, EN 124-2)	5	Open Line →
L-18	Electromagnetic Water Meters Full-bore flanged electromagnetic flowmeters conforming to OIML R49 and ISO 4064 Class B accuracy, rated for bidirectional measurement acros...	Flanged Electromagnetic Water Flow Meters (DN50–DN2000, PN16 / PN25 / PN40, ISO 4064 / OIML R49, IP68) Battery-Powered Remote Telemetry Electromagnetic Water Meters (DN50–DN1200, 10-Year Lithium, GPRS/NB-IoT) Hot-Tap Insertion Electromagnetic Flow Meters for Live Mains (DN150–DN3000, Retractable Sensor, Bi-Directional)	5	Open Line →
L-19	Hydraulic HDPE Butt Welders Semi-automatic and CNC hydraulic butt fusion welding machines built to DVS 2207-1 and ISO 21307 standards, capable of clamping and jointing ...	Compact Field Hydraulic Butt Fusion Welder (OD 63mm–250mm \| DVS 2207-1 Turnkey Package \| 100 Bar) Mid-Range Civil Infrastructure Hydraulic Butt Fusion Welder (OD 160mm–450mm \| ISO 21307 Dual Pressure \| 160 Bar) Heavy Mainline Transmission Hydraulic Butt Fusion Welder (OD 315mm–800mm \| Wheeled Field Trolley \| 180 Bar)	5	Open Line →
L-20	Water Chlorination Chemicals High-grade calcium hypochlorite granules (65-70% available chlorine) and pure sodium hypochlorite solutions formulated to EN 900 and AWWA B3...	Calcium Hypochlorite Granular 70% Chlorine (45kg Drum / Palletized, High-Purity Municipal Grade, EN 900) Liquefied Chlorine Gas in Ton Containers (907kg Net / 1000kg Pressurized Cylinder, UN 1017, ISO 11118) Sodium Hypochlorite Liquid Solution 12–15% Available Chlorine (1000L IBC / 250kg Drum, Drinking Water Grade EN 901)	8	Open Line →
L-21	GRP / FRP Transmission & Sewer Pipes Glass-reinforced plastic (GRP) and mortar pipes manufactured to EN 1796 and ISO 10636 standards, available in diameters DN300 to DN3000 acro...	GRP Filament Wound Potable Water Pressure Pipes (DN300–DN3000 \| PN6–PN25, Stiffness SN2500–SN10000) GRP Gravity Sewer & Wastewater Trunk Pipes (DN400–DN2600 \| SN5000–SN10000, ISO 10467) GRP Microtunneling & Jacking Pipes (DN500–DN2400 \| High Axial Jacking Load Capacity)	5	Open Line →
L-22	HDPE Geomembrane Reservoir & Canal Liners High-density polyethylene geomembrane waterproofing barrier liners compliant with GRI-GM13 specifications, supplied in thicknesses 1.0mm to ...	HDPE Smooth Geomembrane Pond & Reservoir Liners (Thickness 1.0mm–2.0mm \| 7m–8m Width Rolls, GRI-GM13) HDPE Double-Sided Textured Geomembrane Sloped Lagoon Liners (1.5mm–2.5mm \| High-Friction Slope Lining) Geosynthetic Clay Liners (GCL Bentonite Impermeable Waterproofing Mats \| 4,000–5,000 g/m²)	5	Open Line →
L-23	Penstocks & Channel Sluice Gates Heavy-duty stainless steel and cast iron water control penstocks, channel sluice gates, and tidal flap valves manufactured to BS 7775 and AW...	Wall-Mounted Stainless Steel 316L Channel Sluice Gates (500×500mm to 2500×2500mm \| 4-Sided Sealing, AWWA C561) Heavy Cast Iron Flanged Water Control Penstocks (DN300–DN1600 \| Resilient Bronze/SS Seating, BS 7775) Motorized Electric Actuator Channel Penstocks (AUMA / Rotork Multi-Turn Drive, IP68 Submersible)	5	Open Line →
L-24	Wide-Tolerance Couplings & Restraint Adapters Ductile iron wide-tolerance mechanical pipe couplings, stepped universal transition adapters, and tensile restraint flange couplings complia...	Wide-Tolerance Universal Straight Couplings (DN50–DN1200 \| Connecting Ductile, Steel, HDPE & PVC, EN 14525) Self-Anchoring Metal-Grip Restraint Flange Adaptors for PE & PVC Pipes (DN50–DN600, PN16, End-Load Restrained) Stepped Universal Transition Couplings for Differing Outer Diameters (DN50–DN1000, PN16)	5	Open Line →

Water & Wastewater

Division 01 Sourcing Lines (24 Categories)

Primary Master Commodities & High-Demand Systems

Turnkey Technical Procurement & Engineering Capabilities

Comprehensive 24-Category Supply Ecosystem

Iraqi Ministerial Pre-Qualification

Exhaustive Engineering Submittal Dossiers

Certified European & International Metallurgy

Extreme-Environment Corrosion Protection

Integrated Field Equipment Rental & Support

Iraqi Ministerial Alignments & Public Authorities

International Standards & Testing Compliances

Strategic Infrastructure Backbone: Modernizing Iraq's Water & Wastewater Networks

Engineering for Extreme Realities: High Soil Salinity, Water Hammer & Desert Heat

Turnkey Ministerial Compliance & Technical Submittals (MAR)

Division 01 Technical Procurement FAQs

Request a Technical Quotation (RFQ)

RFQ Successfully Transmitted to Central Tendering