Indus Industrial Group supplies heavy-duty Wall-Mounted Stainless Steel Channel Sluice Gates (Penstocks) fabricated from marine-grade AISI 316L or AISI 304 stainless steel in square and rectangular apertures from 500×500mm up to 2500×2500mm. Engineered to AWWA C561, BS 7775, and DIN 19569-4 (Class 4 sealing) standards, these 4-sided sealing sluice gates provide drop-tight isolation for municipal wastewater treatment plant intake bays, aeration basins, raw river intake structures, and irrigation canal regulators across Iraq.
| Pricing Verification | Commercial Quote on Demand (RFQ) |
| Aperture Sizes | 500×500mm to 2500×2500mm (Custom square and rectangular dimensions) |
| Sealing Configuration | 4-Sided Sealing (Orifice / Wall Mounted) / 3-Sided (Open Channel) |
| Working Design Head | 5m to 15m On-Seating Head / 3m to 10m Off-Seating Head |
| Permissible Leakage | ≤ 0.02 L/min per meter of wetted perimeter (exceeds AWWA C561 / DIN 19569-4 Class 4) |
| Frame & Door Materials | AISI 316L (1.4404) Stainless Steel / AISI 304 (1.4301) |
| Resilient Seals | Continuous EPDM / NBR / FKM Musical-Note Lip Seal |
| Low Friction Guides | Self-Lubricating Ultra-High Molecular Weight Polyethylene (UHMWPE) |
| Stem Spindle | Precision Machined Stainless Steel AISI 316 with Trapezoidal Thread |
| Actuation Methods | Manual Handwheel, Bevel Gearbox, Electric Actuator (AUMA/Rotork), Pneumatic |
| Governing Standards | AWWA C561 / BS 7775 / DIN 19569-4 / EN 12266-1 |
| Sector & Division | Water & Wastewater (Div 01) |
| Parent Category | Penstocks & Channel Sluice Gates |
Municipal sewage treatment plant (WWTP) inlet channels, aeration basin isolation, raw water pumping station intake sumps, and storm surge retention basins in Baghdad, Basra, Erbil, Sulaymaniyah, and Najaf.
Corrosive raw sewage, biological slime, and high hydrogen sulfide gas concentrations inside municipal wastewater treatment plants and deep pumping station wet wells quickly destroy standard painted steel sluice gates. Indus Wall-Mounted Stainless Steel Sluice Gates are fabricated entirely from structural AISI 316L or 316Ti stainless steel, providing total immunity to acid corrosion, chloride pitting, and microbial biodegradation without requiring routine recoating.
The gate door (slide plate) is reinforced with heavy horizontal stiffening ribs engineered using finite element analysis (FEA) to limit structural deflection to less than 1/720th of the span under full seated and unseated design heads up to 10 to 15 meters of water. The proprietary sealing system incorporates self-lubricating low-friction polymer guide strips (UHMWPE) paired with continuous resilient EPDM or Viton musical-note (P-type) lip seals mechanically fastened to the frame, ensuring an ultra-tight seal with leakage rates far below AWWA C561 allowable limits.
Operated via non-rising or rising stainless steel stems with trapezoidal threads, gates can be actuated via manual bevel gearboxes, portable electric drill drivers, or multi-turn electric actuators. Wall mounting is achieved via heavy stainless steel chemical anchor studs with silicone mastic backing against flat concrete walls. Staged at Indus Erbil and Baghdad facilities with full factory hydrostatic test certificates.
On-seating head pushes the gate door directly against the frame and rubber seals, naturally enhancing sealing. Off-seating head pushes the door away from the frame; our gates utilize heavy wedge-action blocks and structural stiffeners to guarantee leak-tight shutoff even under off-seating pressure.
Gates are secured to flat civil concrete walls using high-tensile AISI 316 chemical epoxy anchor studs. Non-shrink grout or polyurethane elastomeric mastic is placed between the frame and concrete to ensure zero perimeter bypass leakage.
Yes. We provide pre-engineered mounting pedestals, stem extensions, and torque brackets compatible with AUMA, Rotork, or Bernard electric multi-turn actuators for centralized SCADA flow regulation.
