CATEGORY LINE #2 8 Master B2B Products Indus Division 01 Engineering Directorate

HDPE PE100 Pressure Pipes

High-density polyethylene PE100 pressure piping systems conforming to ISO 4427 and EN 12201 standards, available in diameters 20mm to 1200mm across pressure classes PN6 to PN25 (SDR 26 to SDR 7.4). Formulated with superior slow crack growth (RC) resistance for continuous operations in extreme Middle Eastern ambient temperatures up to +55°C. Deployed extensively in potable water transmission, raw intake networks, and industrial outfalls.

Direct WhatsApp Desk 📁 Upload Multi-Item BOQ
Turnkey Master Solutions

Master B2B Product Specifications in HDPE PE100 Pressure Pipes

Review complete operational envelopes, engineering standards, and pre-staged inventory models ready for procurement across Iraq.

IND-PRD-000001 Active Staging Line

Municipal Potable Water PE100 Pressure Pipes (OD 20mm–1200mm | PN6–PN25 | SDR 26–SDR 7.4)

Available Diameters: OD 20mm to OD 1200mm
Pressure Ratings: PN6, PN10, PN16, PN20, PN25

Certified high-density polyethylene PE100 pressure piping systems manufactured specifically for municipal potable water...

✔ 100% virgin bimodal PE100 resin compound with Minimum Required Strength (MRS) >= 10.0 MPa at 50-year design life.
✔ Comprehensive dimensional envelope spanning outside diameters OD 20mm to 1200mm in continuous SDR classes (SDR 26, 21, 17, 13.6, 11, 9, 7.4).
IND-PRD-000002 Active Staging Line

Natural Gas Distribution PE100 Polyethylene Pipes (OD 20mm–630mm | MOP Up to 10 Bar | SDR 11–SDR 17.6)

Size Range: OD 20mm to OD 630mm
Melt Flow Index (MFI): 0.2 to 0.4 g/10 min

Specialized high-density polyethylene PE100 pressure piping systems engineered strictly for buried natural gas transmission,...

✔ Certified compliance with ISO 4437, EN 1555, and GIS/PL2-2 for hazardous hydrocarbon gas distribution.
✔ Engineered for Maximum Operating Pressure (MOP) up to 10 bar (gas) in SDR 11 and 6 bar in SDR 17.6.
IND-PRD-000003 Active Staging Line

PE100-RC Crack-Resistant Trenchless Pipes (OD 63mm–1000mm | PAS 1075 Type 1/2/3 | SDR 11–SDR 17)

Available Sizes: OD 63mm to OD 1000mm in straight lengths and coils up to 110mm
Pressure Classes: PN10, PN16, PN25

Ultra-high stress-crack-resistant PE100-RC (Resistant to Crack) pressure piping systems engineered specifically for modern...

✔ Certified to PAS 1075 Type 1, Type 2, and Type 3 for trenchless HDD and sandbed-free installation.
✔ Slow crack growth resistance in Full Notch Creep Test (FNCT) exceeding 8,760 hours without failure.
IND-PRD-000004 Active Staging Line

Co-Extruded Multi-Layer Barrier PE100 Pipes (OD 32mm–800mm | PN10–PN25 | Hydrocarbon Resistant)

Available Diameters: OD 32mm to OD 800mm in straight lengths and coils
Pressure Ratings: PN10, PN16, PN25

Multi-layer co-extruded barrier high-density polyethylene pressure piping systems engineered specifically for contaminated...

✔ Integrated continuous aluminum or EVOH barrier layer providing 100% impermeability against hydrocarbons.
✔ Certified compliance with WIS 4-32-19 and ISO 21003 for installation in contaminated brownfield soils.
IND-PRD-000005 Active Staging Line

Heavy-Duty Industrial & Mining Slurry PE100 Pipes (OD 90mm–1200mm | PN16–PN32 | SDR 9–SDR 6)

Available Sizes: OD 90mm to OD 1200mm in straight 12m lengths
Pressure Classes: PN16, PN20, PN25, PN32

Extra-heavy wall high-density polyethylene PE100 pressure piping systems engineered specifically for severe abrasive slurry...

✔ Engineered for extreme operating pressures up to PN32 (464 PSI) in heavy-wall SDR 6 and SDR 7.4.
✔ Abrasion resistance outlasting carbon steel by 3 to 5 times under abrasive solids and sand slurry flows.
IND-PRD-000006 Active Staging Line

Subsurface Perforated Leachate & Drainage PE100 Pipes (OD 110mm–630mm | SN8–SN16 | DIN 4262-1)

Available Diameters: OD 110mm, 160mm, 200mm, 250mm, 315mm, 400mm, 500mm, 630mm
Ring Stiffness: SN8 | SN16 under ISO 9969

High-ring-stiffness perforated and slotted high-density polyethylene PE100 subsurface drainage and leachate collection...

✔ Manufactured in strict compliance with DIN 4262-1 (Type R, Class 1) and ISO 9969 ring stiffness.
✔ High structural ring stiffness ratings SN8 (>= 8 kN/m2) and SN16 (>= 16 kN/m2) for deep burial depths.
IND-PRD-000114 Active Staging Line

HDPE PE100 Potable Water Service Connection Coils (OD 20mm–63mm | PN16, 100m–200m Rolls, ISO 4427)

Outside Diameter Range: OD 20mm, 25mm, 32mm, 40mm, 50mm, 63mm
Working Pressure Rating: PN16 Standard / PN20 Heavy Duty

Indus Industrial Group manufactures and stocks continuous-length HDPE PE100 Potable Water Service Connection Coils engineered...

✔ Continuous 100m and 200m coil lengths eliminating intermediate joints and underground leakage.
✔ 100% virgin PE100 pre-compounded resin rated PN16 (SDR 11) for continuous 16 Bar potable service.
IND-PRD-000115 Active Staging Line

Heavy-Duty Agricultural Irrigation Black PE Coils (OD 25mm–90mm | PN6–PN10, 100m–200m Coils)

Diameter Coverage: OD 25mm, 32mm, 40mm, 50mm, 63mm, 75mm, 90mm
Pressure Classes: PN6 / PN8 / PN10

Indus Industrial Group supplies Heavy-Duty Agricultural Irrigation Black Polyethylene (PE) Coils manufactured in outside...

✔ Economical PN6 and PN10 pressure ratings tailored specifically for agricultural water distribution.
✔ Available in sizes OD 25mm up to OD 90mm in continuous 100m to 200m unrolling coils.
Technical Brief & Iraqi Standards

Field Engineering Analysis for HDPE PE100 Pressure Pipes

Operational specifications, material metallurgy, and field operating conditions synthesized from technical project submittals across Iraq.

Technical Brief 01

Municipal Potable Water PE100 Pressure Pipes (OD 20mm–1200mm | PN6–PN25 | SDR 26–SDR 7.4)

High-density polyethylene PE100 pressure pipes represent the foundational arterial backbone of modern civil municipal water networks, engineered strictly in accordance with ISO 4427-2, EN 12201-2, and DIN 8074/8075...

Verified Submittal Full Submittal Specs →
Technical Brief 02

Natural Gas Distribution PE100 Polyethylene Pipes (OD 20mm–630mm | MOP Up to 10 Bar | SDR 11–SDR 17.6)

Polyethylene PE100 natural gas distribution pipes are engineered to the most stringent safety and material tolerances in modern pipeline engineering, governed strictly by ISO 4437-2, EN 1555-2, and GIS/PL2-2...

Verified Submittal Full Submittal Specs →
Technical Brief 03

PE100-RC Crack-Resistant Trenchless Pipes (OD 63mm–1000mm | PAS 1075 Type 1/2/3 | SDR 11–SDR 17)

PE100-RC represents the peak of thermoplastic resin engineering for civil infrastructure, specifically developed to solve point-loading and external notch notch propagation failures governed by DIN PAS 1075 and ISO...

Verified Submittal Full Submittal Specs →
Technical Brief 04

Co-Extruded Multi-Layer Barrier PE100 Pipes (OD 32mm–800mm | PN10–PN25 | Hydrocarbon Resistant)

Conventional polyolefin materials, including standard PE100, are semi-permeable to low-molecular-weight non-polar hydrocarbons, chlorinated solvents, and petroleum fuels. When standard plastic pipes are buried...

Verified Submittal Full Submittal Specs →
Infrastructure & Project Deployment

Field Applications Across Iraq Infrastructure Corridors

Proven technical deployment envelopes across municipal trunk utilities, energy concessions, and civil engineering works in Iraq.

Deployment Corridor 01

Municipal raw water transmission trunk pipelines

Deployment Corridor 02

urban potable water distribution grids

Deployment Corridor 03

booster pumping station discharge manifolds

Deployment Corridor 04

river water intake crossings

Deployment Corridor 05

reservoir distribution pipelines

Deployment Corridor 06

major civil water infrastructure projects

Deployment Corridor 07

Urban natural gas distribution grids

Deployment Corridor 08

industrial park LPG vapor networks

Tender & Specification Inquiries

Technical & Engineering FAQs for HDPE PE100 Pressure Pipes

Direct authoritative answers for procurement officers, consultant engineers, and EPC contractors specifying HDPE PE100 Pressure Pipes in Iraq.

What international quality inspection certificates accompany each PE100 pipe delivery batch in Iraq?
Every production batch is delivered with complete EN 10204 Type 3.1 inspection certificates, including hydrostatic burst test records (ISO 1167 at 20°C and 80°C), melt flow rate (MFR) tests, carbon black content and dispersion reports, and formal WRAS / BS 6920 potable water hygiene conformity documents.
Can PE100 gas pipe be used for LPG (Liquefied Petroleum Gas) networks?
Yes, PE100 pipe is certified for LPG vapor phase distribution at pressures up to 4 bar, provided the gas remains entirely in the vapor state and heavy liquid condensation is prevented via appropriate upstream pressure regulation.
What is the primary difference between standard PE100 and PE100-RC?
While both materials share the same 50-year long-term hydrostatic strength (MRS 10 MPa), PE100-RC is formulated with specialized polymer chain branching that provides over 10 times higher resistance to slow crack growth (SCG), making it virtually immune to cracking from surface notches and stone point-loads.
Why cannot standard PE100 pipes be installed near oil refineries or fuel storage depots?
Standard polyethylene has a non-polar polymer structure that allows volatile organic hydrocarbons (such as benzene, gasoline, and diesel) to slowly permeate through the wall into drinking water, causing toxic contamination and chemical swelling that compromises structural integrity.
Why does PE100 outlast carbon steel pipes in abrasive slurry applications?
Unlike steel, which is rigid and suffers micro-chipping and erosive cutting when struck by abrasive particles, PE100 is viscoelastic. Its polymer chains deflect elastically under particle impact, absorbing the kinetic energy and rebounding without material loss.
Why are slots preferred over drilled round holes in perforated drainage pipes?
CNC-machined longitudinal slots provide higher structural section modulus than large round holes, maintaining higher pipe ring stiffness under heavy soil overburden while offering significantly greater water inlet surface area (>= 50 cm2/m) with reduced tendency to clog.
Integrated Infrastructure Procurement

Complementary Supply Lines in Division 01: Water & Wastewater

Turnkey civil & mechanical contractors can integrate engineering specifications across companion categories in this operating division.

COMPLEMENTARY LINE

End-Suction Water Pumps

8 Active Products Explore Line →
COMPLEMENTARY LINE

Water Chlorination Chemicals

8 Active Products Explore Line →
COMPLEMENTARY LINE

Ductile Iron Pipes

7 Active Products Explore Line →
COMPLEMENTARY LINE

HDPE Electrofusion Fittings

6 Active Products Explore Line →
COMPLEMENTARY LINE

HDPE Butt Fusion Fittings

6 Active Products Explore Line →
COMPLEMENTARY LINE

Ductile Iron Flanged Fittings

6 Active Products Explore Line →