Indus Industrial Group supplies heavy-duty HDPE Electrofusion Equal and Reducing Tees engineered across nominal run and branch diameters from DN25 to DN400 in pressure rating SDR11 (PN16 water / PN10 gas) according to EN 12201-3 and ISO 4427-3 standards. Featuring embedded electrical resistance coils in all three socket bells, these monolithic injection-molded PE100 fittings enable rapid, fully fused three-way branch connections without mechanical clamps or auxiliary reducers. Engineered for municipal distribution branch lines, fire hydrant risers, and industrial manifold headers across Iraq.
| Pricing Verification | Commercial Quote on Demand (RFQ) |
| Governing Standards | EN 12201-3 / ISO 4427-3 / EN 1555-3 / GIS PL2-4 |
| Run Diameter Range | DN25 to DN400 (Main pipeline outside diameter) |
| Branch Diameter Range | DN25 to DN400 (Equal or reduced branch takeoffs) |
| Pressure Classification | SDR11 (PN16 Water / PN10 Natural Gas) |
| Raw Material | Virgin PE100 Black Pre-Compounded Compound (MRS 10 MPa) |
| Welding System | 39.5V – 40V Universal Electrofusion System |
| Barcode Specification | ISO 13950 standard 24-digit optical barcode |
| Terminal Pins | 4.0 mm terminal pins with protective covers |
| Hygiene Certification | WRAS / NSF 61 / DVGW Drinking Water Certified |
| Packaging | Individually hermetically sealed in protective UV bags |
| Sector & Division | Water & Wastewater (Div 01) |
| Parent Category | HDPE Electrofusion Fittings |
Municipal water distribution branch networks, district fire hydrant lateral take-offs, commercial building service headers, industrial cooling water branch manifolds, and gas distribution networks across Baghdad, Erbil, Basra, Mosul, and Najaf.
HDPE Electrofusion Equal and Reducing Tees provide the ultimate high-integrity branch connection technology for municipal water distribution grids, commercial branch take-offs, and industrial distribution manifolds across Iraq. In pressurized water distribution systems in Baghdad, Basra, Erbil, and Karbala, pipe branches are subjected to intense dynamic hydraulic thrust forces whenever branch valves open and close. Indus electrofusion tees create a homogeneous, molecularly fused three-way junction that resists axial hydraulic pull-out and bending moments without requiring external concrete thrust blocks.
Each tee is injection-molded from premium virgin PE100 pre-compounded black resin. All three socket bells incorporate precision-wound copper resistance heating wires with independent electrical circuits, allowing technicians to weld the main run and the branch takeoff simultaneously or sequentially depending on field power availability. Integrated optical barcodes (ISO 13950) provide automated welding parameters for standard 40V electrofusion units, with dual pop-up indicators on each socket confirming proper melt expansion.
Under harsh Iraqi subsoil conditions, where aggressive sulfates and fluctuating groundwater corrode metallic branch tees, the 100% polyethylene body provides complete chemical immunity over a 100-year design life. Staged at the Erbil Heavy Plant Yard, Baghdad Central Logistics Depot, and Basra Port Hub, Indus maintains complete matrices of equal and reducing branch sizes with full EN 10204 3.1 inspection certification.
Yes. Each socket bell has its own dedicated electrical terminals and barcode. Technicians can weld the run sockets first and weld the branch socket later when the branch line is ready, providing maximum job-site flexibility.
Yes. Indus stocks molded reducing electrofusion tees (e.g., DN110×63, DN160×110, DN200×110, DN250×160) with pre-reduced branch sockets, saving contractors the cost and installation time of extra fittings.
Indus supplies four-way rotational pipe alignment clamps that hold the host pipe and branch spigots in perfect 90-degree alignment during the fusion and cooling cycles, preventing pipe misalignment.
