Indus Industrial Group supplies heavy-duty Non-Clog Submersible Sewage and Wastewater Pumps engineered across discharge diameters from DN80 to DN600 with electric motor ratings from 1.5 kW to 250 kW (400V 50Hz, IP68 continuous submersible duty) according to EN 12050-1 and ISO 9906 standards. Equipped with high-efficiency non-clog semi-open single-channel or vortex impellers with large free spherical solid passages (up to 100–120mm), these pumps handle raw unscreened municipal sewage, heavy sludge, and fibrous storm runoff across Iraq. Built with dual silicon carbide mechanical seals, integrated thermal and moisture leakage sensors, and auto-coupling duckfoot guide rail systems, they ensure continuous operation in severe wet-well environments.
| Pricing Verification | Commercial Quote on Demand (RFQ) |
| Governing Standards | EN 12050-1 / ISO 9906 Grade 2B / IEC 60034 / CE |
| Discharge Diameter Range | DN80 to DN600 (Metric Flanged to EN 1092-2) |
| Motor Power Rating | 1.5 kW to 250 kW (400V ±10%, 3-Phase, 50 Hz) |
| Motor Enclosure & Protection | IP68 / Submersible up to 20m depth / Class H (180°C) |
| Hydraulic Flow Range | 20 m³/h to 3,500 m³/h (Head range: 5m to 75m) |
| Free Solid Passage | 76 mm to 120 mm spherical solid passage |
| Impeller Technology | Enclosed Single/Multi-Channel / Semi-Open Vortex Impeller |
| Casing & Impeller Material | Cast Iron EN-GJL-250 / Ductile Iron EN-GJS-500-7 / Hardened Cr26 |
| Shaft & Fasteners | Stainless Steel AISI 420 / AISI 316 (High Fatigue Strength) |
| Guide Rail System | Cast Iron Auto-Coupling Foot with Twin Guide Rail Brackets |
| Sector & Division | Water & Wastewater (Div 01) |
| Parent Category | Submersible Sewage Pumps |
Municipal raw sewage lift stations, wastewater treatment plant intake pump stations, deep highway underpass storm drainage sumps, industrial food and beverage effluent pumping, and municipal stormwater outfalls across Baghdad, Erbil, Basra, Najaf, Karbala, and Kirkuk.
Heavy-Duty Non-Clog Submersible Sewage Pumps represent the core mechanical equipment for municipal wastewater lift stations, trunk collection sumps, and wastewater treatment plants (WWTPs) across Federal Iraq and the Kurdistan Region. Operating under EN 12050-1, ISO 9906 (Grade 2B), and IEC 60034 standards, these pumps are built to pump raw municipal wastewater heavily laden with fibrous wipes, sanitary textiles, plastic bags, and dense street grit common in Iraqi sewer grids. The hydraulic end features computer-modeled single-channel or vortex impellers with generous continuous spherical clearances, completely eliminating the catastrophic blockages that trip standard centrifugal pumps.
The motor casing and volute are cast from heavy-wall grey cast iron (EN-GJL-250) or ductile iron (EN-GJS-500-7) engineered for Class H (180°C) insulation and IP68 continuous immersion up to 20 meters depth. Mechanical shaft sealing is provided by dual independent silicon carbide/silicon carbide (SiC/SiC) mechanical seals running inside an isolated oil inspection chamber, preventing sewage ingress into motor windings even when pumping aggressive sandy wastewater from the Basra or Baghdad basins. Integrated bimetallic thermal overload sensors and conductivity moisture leak probes provide automated safety tripping to SCADA control panels.
Installed on standard dual-pipe stainless steel guide rail systems with cast iron auto-coupling duckfoot discharge bases, pumps can be lowered and raised automatically using a lifting chain without requiring personnel to enter dangerous septic wet-wells. Stocked at the Erbil Heavy Plant Yard, Baghdad Central Depot, and Basra Port Corridor, Indus provides complete pump packages with local control panels, soft starters/VFDs, float switches, and full EN 10204 3.1 inspection certification.
The auto-coupling system permanently bolts the discharge bend to the wet-well floor with two vertical guide rails extending to the top manhole. The pump slides down the rails under its own weight and seals automatically against the discharge elbow via a machined rubber wedge. Technicians can hoist the pump out for inspection without entering the hazardous septic pit.
Yes. Indus submersible motors are wound with Class H insulation and heavy copper wire designed to accommodate wide voltage fluctuations (400V ±10% to 15% tolerance at 50Hz). Motors are fully compatible with soft starters and variable frequency drives (VFDs) supplied in our control panel packages.
Indus supplies complete weatherproof IP55/IP65 pump control panels equipped with Schneider/ABB switchgear, digital motor protectors, ultrasonic level controllers, float switches, auto-alternation relays, and GSM/SCADA remote alarm modems.
