CATEGORY LINE #14 5 Master B2B Products Indus Division 01 Engineering Directorate

Submersible Sewage Pumps

Heavy-duty non-clog submersible wastewater and sewage pumps built to ISO 9906 Grade 2B standards, featuring single-channel or vortex impellers passing solid spheres up to 100mm. Encapsulated in cast iron casing with IP68 Class H insulated motors and tandem silicon carbide mechanical seals. Deployed in municipal lift stations, deep wet wells, and municipal wastewater treatment intake works across Iraqi governorates.

Direct WhatsApp Desk 📁 Upload Multi-Item BOQ
Turnkey Master Solutions

Master B2B Product Specifications in Submersible Sewage Pumps

Review complete operational envelopes, engineering standards, and pre-staged inventory models ready for procurement across Iraq.

IND-PRD-000050 Active Staging Line

Heavy-Duty Non-Clog Submersible Sewage Pumps (DN80–DN600, 1.5 kW–250 kW, Cast/Ductile Iron, IP68)

Discharge Diameter Range: DN80 to DN600
Hydraulic Flow Range: 20 m³/h to 3,500 m³/h

Indus Industrial Group supplies heavy-duty Non-Clog Submersible Sewage and Wastewater Pumps engineered across discharge...

✔ Non-clog single-channel and vortex impellers with up to 120mm free spherical solid passage.
✔ Heavy IP68 submersible motor (Class H insulation) engineered for continuous duty up to 45°C ambient.
IND-PRD-000051 Active Staging Line

Submersible Grinder & Cutter Sewage Pumps (DN40–DN100, 1.5 kW–15 kW, High-Torque Shredder Impeller)

Hydraulic Head: Maximum shutoff head up to 65 meters
Motor Power Range: 1.5 kW to 15.0 kW

Indus Industrial Group supplies heavy-duty Submersible Grinder and Cutter Sewage Pumps engineered across discharge sizes from...

✔ Hardened stainless steel (55–60 HRC) rotary cutter shredding textiles and solids into fine slurry.
✔ Enables pressurized sewage transmission through economical small-diameter HDPE pipes (DN50–DN90).
IND-PRD-000096 Active Staging Line

High-Flow Submersible Stormwater Axial-Flow Propeller Pumps (DN300–DN1200, 15 kW–315 kW, IP68)

Discharge Column Range: DN300 to DN1200
Flow Rate Capacity: 500 m³/h to 12,000 m³/h

Indus Industrial Group supplies heavy-duty High-Flow Submersible Axial-Flow and Mixed-Flow Propeller Stormwater Pumps...

✔ Colossal volumetric discharge capacity reaching up to 12,000 m³/h at heads from 2m to 18m.
✔ Vertical column tube installation reducing civil pump station construction costs by 50%.
IND-PRD-000097 Active Staging Line

Corrosion-Resistant Stainless Steel Submersible Effluent Pumps (DN50–DN200, SS316, 2.2 kW–45 kW)

Motor Power Range: 2.2 kW to 45.0 kW
Governing Standards: ISO 9906 Grade 2B / EN 12050 / IEC 60034 / CE Marked

Indus Industrial Group supplies heavy-duty Corrosion-Resistant All-Stainless Steel Submersible Effluent and Chemical Pumps...

✔ 100% investment-cast stainless steel AISI 316 / CF8M construction for extreme chemical duty.
✔ Chemical resistance across pH 2.0 to pH 12.0 resisting acids, alkalis, and hyper-saline water.
IND-PRD-000098 Active Staging Line

Heavy-Duty Submersible Sludge & Sand Agitator Pumps (DN80–DN250, High-Chrome Impeller, 7.5 kW–90 kW)

Discharge Size Range: DN80, DN100, DN150, DN200, DN250
Motor Power Range: 7.5 kW to 90.0 kW

Indus Industrial Group supplies severe-duty Submersible Sludge, Sand, and Slurry Agitator Pumps engineered across discharge...

✔ Integrated high-chrome rotating agitator head fluidizing settled sand and dense silt.
✔ High-chromium white iron (28% Cr, 60–65 HRC) impeller, agitator, and wear plates.
Technical Brief & Iraqi Standards

Field Engineering Analysis for Submersible Sewage Pumps

Operational specifications, material metallurgy, and field operating conditions synthesized from technical project submittals across Iraq.

Technical Brief 01

Heavy-Duty Non-Clog Submersible Sewage Pumps (DN80–DN600, 1.5 kW–250 kW, Cast/Ductile Iron, IP68)

Heavy-Duty Non-Clog Submersible Sewage Pumps represent the core mechanical equipment for municipal wastewater lift stations, trunk collection sumps, and wastewater treatment plants (WWTPs) across Federal Iraq and the...

Verified Submittal Full Submittal Specs →
Technical Brief 02

Submersible Grinder & Cutter Sewage Pumps (DN40–DN100, 1.5 kW–15 kW, High-Torque Shredder Impeller)

Submersible Grinder and Cutter Sewage Pumps provide the modern, cost-effective engineering solution for pressurized sanitary sewerage schemes in suburban residential communities, highway service plazas, military...

Verified Submittal Full Submittal Specs →
Technical Brief 03

High-Flow Submersible Stormwater Axial-Flow Propeller Pumps (DN300–DN1200, 15 kW–315 kW, IP68)

High-Flow Submersible Axial-Flow and Mixed-Flow Propeller Pumps represent the critical flood-defense infrastructure equipment deployed across municipal storm canals, agricultural irrigation drain networks, and river...

Verified Submittal Full Submittal Specs →
Technical Brief 04

Corrosion-Resistant Stainless Steel Submersible Effluent Pumps (DN50–DN200, SS316, 2.2 kW–45 kW)

Corrosion-Resistant All-Stainless Steel Submersible Effluent Pumps provide the definitive pumping solution for corrosive chemical wastewater, industrial refinery effluent sumps, and hyper-saline groundwater drainage...

Verified Submittal Full Submittal Specs →
Infrastructure & Project Deployment

Field Applications Across Iraq Infrastructure Corridors

Proven technical deployment envelopes across municipal trunk utilities, energy concessions, and civil engineering works in Iraq.

Deployment Corridor 01

Municipal raw sewage lift stations

Deployment Corridor 02

wastewater treatment plant intake pump stations

Deployment Corridor 03

deep highway underpass storm drainage sumps

Deployment Corridor 04

industrial food and beverage effluent pumping

Deployment Corridor 05

municipal stormwater outfalls

Deployment Corridor 06

Pressurized municipal sewer networks

Deployment Corridor 07

Municipal storm flood pumping stations into Tigris/Euphrates/Shatt al-Arab

Deployment Corridor 08

agricultural irrigation canal lifting

Tender & Specification Inquiries

Technical & Engineering FAQs for Submersible Sewage Pumps

Direct authoritative answers for procurement officers, consultant engineers, and EPC contractors specifying Submersible Sewage Pumps in Iraq.

How does the auto-coupling system simplify maintenance in toxic sewage sumps?
The auto-coupling system permanently bolts the discharge bend to the wet-well floor with two vertical guide rails extending to the top manhole. The pump slides down the rails under its own weight and seals automatically against the discharge elbow via a machined rubber wedge. Technicians can hoist the pump out for inspection without entering the hazardous septic pit.
What materials can the grinder pump shred without jamming?
The hardened AISI 440C stainless steel cutter (58 HRC) effortlessly shreds fibrous rags, sanitary towels, wet wipes, plastics, thin rubber, and food waste into micro-particles under 6mm. Only large hard metals or stones can cause blockages, which are arrested by the intake suction plate.
How does the vertical column tube installation simplify pump maintenance in Iraq?
The pump is not bolted to the floor. It slides down inside a vertical steel or concrete tube and seats on a bottom tapered shoulder under its own weight. When servicing is required, a mobile crane simply hoists the pump straight up out of the tube in minutes without unbolting a single pipe flange or draining the station.
Why is cast stainless steel 316 required instead of epoxy-coated cast iron in Iraq?
In aggressive chemical or highly saline wastewater (such as reverse osmosis brine or refinery effluent in Basra), abrasive grit quickly scratches epoxy coatings, exposing bare cast iron to rapid chemical attack. A solid cast AISI 316 pump has homogeneous corrosion resistance throughout its entire wall thickness, ensuring decades of service.
How does the mechanical agitator prevent raw water intake silt blockages in Iraq?
The rotating agitator head acts like an underwater mixer blade directly below the pump suction. It breaks up packed silt and sand, churning it into a thick liquid slurry that is immediately sucked through the pump and discharged, keeping intake basins completely clear of silt deposits.
Can these motors handle voltage fluctuations common in the Iraqi electrical grid?
Yes. Indus submersible motors are wound with Class H insulation and heavy copper wire designed to accommodate wide voltage fluctuations (400V ±10% to 15% tolerance at 50Hz). Motors are fully compatible with soft starters and variable frequency drives (VFDs) supplied in our control panel packages.
Integrated Infrastructure Procurement

Complementary Supply Lines in Division 01: Water & Wastewater

Turnkey civil & mechanical contractors can integrate engineering specifications across companion categories in this operating division.

COMPLEMENTARY LINE

HDPE PE100 Pressure Pipes

8 Active Products Explore Line →
COMPLEMENTARY LINE

End-Suction Water Pumps

8 Active Products Explore Line →
COMPLEMENTARY LINE

Water Chlorination Chemicals

8 Active Products Explore Line →
COMPLEMENTARY LINE

Ductile Iron Pipes

7 Active Products Explore Line →
COMPLEMENTARY LINE

HDPE Electrofusion Fittings

6 Active Products Explore Line →
COMPLEMENTARY LINE

HDPE Butt Fusion Fittings

6 Active Products Explore Line →