Indus Industrial Group supplies premier Flanged Electromagnetic Water Flow Meters (Magmeters) engineered across nominal pipeline diameters from DN50 to DN2000 in pressure classes PN16, PN25, and PN40 according to ISO 4064, OIML R49, and EN 14154 standards. Operating on Faraday’s law of electromagnetic induction with zero moving parts, these meters provide high custody-transfer accuracy (±0.2% to ±0.5%) without causing any pressure drop or obstruction in the flow stream. Featuring high-durability hard rubber or PTFE liners, Hastelloy C / 316L sensing electrodes, and IP68 submersible sensor bodies, they are designed for municipal custody transfer, water treatment plant intake/discharge billing, and raw river water monitoring across Iraq.
| Pricing Verification | Commercial Quote on Demand (RFQ) |
| Governing Standards | ISO 4064 / OIML R49 / EN 14154 / ISO 9104 / AWWA C701 |
| Nominal Diameter Range | DN50 to DN2000 (Full-Bore Metric Sizes) |
| Measurement Accuracy | ± 0.2% to ± 0.5% of measured rate (Calibrated) |
| Pressure Classes | PN16, PN25, PN40 (Flanged to EN 1092-2 / ISO 7005) |
| Sensor Enclosure Protection | IP68 (Submersible up to 10m continuous water depth) |
| Internal Lining Options | Hard Ebonite Rubber / Polyurethane / PTFE (WRAS approved) |
| Measuring Electrodes | Hastelloy C-22 / Stainless Steel AISI 316L / Titanium |
| Velocity Range | 0.1 m/s to 12.0 m/s (Bi-directional measurement) |
| Output Signals | 4–20 mA, Scaled Pulse, RS485 Modbus RTU, HART, Profibus-DP |
| Power Supply | 220V AC (50Hz) / 24V DC / Internal Lithium Battery Option |
| Sector & Division | Water & Wastewater (Div 01) |
| Parent Category | Electromagnetic Water Meters |
Municipal water treatment plant production metering, District Metered Area (DMA) master bulk metering, river intake raw water stations, industrial effluent discharge billing, and commercial custody-transfer points across Baghdad, Erbil, Basra, Mosul, Najaf, and Karbala.
Flanged Electromagnetic Water Flow Meters represent the ultimate technological standard for accurate volumetric measurement, non-revenue water (NRW) monitoring, and commercial billing in pressurized municipal and industrial pipelines across Iraq. Governed by ISO 4064, OIML R49 (Class 1 and Class 2), and EN 14154 international custody transfer standards, magmeters operate with a completely unobstructed, straight-through sensor tube with zero moving parts, zero mechanical wear, and zero hydraulic head loss. Unlike mechanical turbine or Woltman meters that clog, wear out, and lose accuracy within months due to sand, silt, and dissolved minerals in the Tigris and Euphrates rivers, electromagnetic meters remain impervious to suspended solids and maintain certified measurement accuracy over decades.
The flow sensor body is fabricated from robust carbon steel or stainless steel with a centrifugally bonded hard ebonite rubber, polyurethane, or PTFE internal lining certified non-toxic for drinking water (WRAS, NSF 61). Two or three pairs of Hastelloy C-22, titanium, or 316L stainless steel sensing electrodes measure the micro-voltage induced by conductive water passing through the electromagnetic field. An integrated empty-pipe detection electrode prevents phantom flow accumulation when lines drain. The sensor features an IP68 hermetically sealed potting enclosure that operates continuously submerged in flooded underground valve chambers.
The digital signal converter is available in compact (integral) or remote wall-mounted configurations up to 200 meters away, featuring bilingual backlit displays, 4–20mA analog outputs, pulse outputs, and RS485 Modbus / HART / Profibus communications for seamless SCADA integration. Staged at the Erbil Heavy Plant Yard, Baghdad Central Logistics Depot, and Basra Port Hub, Indus supplies flow meters with individual calibration certificates, grounding rings, and full EN 10204 3.1 inspection documentation.
Mechanical meters contain spinning rotors and bearings that quickly wear down or jam from sand and silt in Iraqi river water, losing up to 20% measurement accuracy within a year. Magmeters have no moving parts or obstructions in the pipe bore, resulting in zero wear, zero pressure drop, and permanent measurement accuracy.
Yes. Indus flow sensors are potted with specialized epoxy resin and certified to IP68 (NEMA 6P), allowing them to remain completely submerged in water indefinitely inside flooded roadside valve chambers without electrical shorting or sensor damage.
Yes. Every flow meter is supplied with a factory wet-calibration test certificate traceable to international standards (ISO 17025) and matching stainless steel grounding rings to ensure accurate electrical referencing in plastic and lined pipes.
