Erbil Logistics Hub: Northern Plant Yard Baghdad Office: Central Tendering Basra Support Node: Southern Energy Supply
verified ISO 9001:2015 & API Certified call +964 750 821 4490 mail [email protected]
Iraq Hubs: Erbil • Baghdad • Basra
IND-PRD-000101 Active Procurement Line Division 01 • Water & Wastewater

Self-Priming High-Suction-Lift Centrifugal Sewage & Trash Pumps (DN80–DN300, Solids Handling, 4 kW–75 kW)

Engineering Metric & Operational Range:
⚡ DN80–DN300, Solids Handling, 4 kW–75 kW

📄 Executive Technical Summary

Indus Industrial Group supplies heavy-duty Self-Priming Centrifugal Sewage and Trash Pumps engineered across suction/discharge sizes from DN80 to DN300 with electric motor and diesel engine drives from 4 kW to 75 kW according to ISO 2858 and Hydraulic Institute standards. Designed for surface mounting above wet-wells with high suction lift capabilities up to 7.6 meters, these pumps feature large internal priming chambers, two-vane non-clog ductile iron impellers passing up to 76mm solids, external shimless impeller clearance adjustment, and quick-remove inspection cleanout covers for rapid maintenance across Iraq.

Key Engineering Features & Performance

Above-ground dry-pit installation eliminating dangerous man-entry into toxic sewage wet-wells.
Rapid automatic self-priming with exceptional suction lifts reaching up to 7.6 meters.
Non-clog two-vane ductile iron impeller passing up to 76mm (3") spherical solids and rags.
Quick-remove front cleanout cover enabling complete blockage clearance in under 3 minutes.
External shimless impeller clearance adjustment extending peak hydraulic efficiency.
Discharge sizes spanning DN80 to DN300 with electric motor or diesel engine drives.

📋 Technical Datasheet Parameters

RFQ Pricing Model
Pricing Verification Commercial Quote on Demand (RFQ)
Governing Standards ISO 2858 / Hydraulic Institute Standards / CE Marked
Suction & Discharge Range DN80 (3"), DN100 (4"), DN150 (6"), DN200 (8"), DN250 (10"), DN300 (12")
Maximum Suction Lift Up to 7.6 meters (25 feet) vertical suction lift at sea level
Flow Rate Capacity 20 m³/h to 1,200 m³/h (Head range: 10m to 65m)
Motor / Engine Power 4.0 kW to 75.0 kW (400V 50Hz Electric / Industrial Diesel)
Solid Handling Capacity 38 mm to 76 mm (1.5" to 3.0") spherical solid clearance
Casing & Impeller Material Ductile Iron EN-GJS-500-7 / Cast Iron EN-GJL-250 / CD4MCu
Cleanout Cover Quick-Opening Removable Front Inspection Plate with Handwheel Knobs
Shaft Sealing Cartridge Double-Lip Oil-Lubricated Silicon Carbide Mechanical Seal
Mounting Configurations Stationary Channel Steel Skid / Heavy-Duty Mobile Towing Road Trailer
Sector & Division Water & Wastewater (Div 01)
Parent Category End-Suction Water Pumps

🏗 Infrastructure Applications & Project Deployments

Municipal wastewater lift stations, emergency civil sewer bypass pumping during pipe rehabilitation, highway underpass flood dewatering, industrial effluent transfer, and construction site excavation dewatering across Baghdad, Basra, Erbil, Najaf, and Karbala.

🔬 Authoritative Engineering Analysis

Self-Priming Centrifugal Sewage and Trash Pumps represent the premier dry-well pumping technology for municipal wastewater lift stations, civil sewer bypass pumping, and industrial effluent sumps across Iraq. Unlike submersible pumps that operate submerged in hazardous, toxic sewage wet-wells, self-priming pumps are installed above ground in clean, well-ventilated dry pump houses. When maintenance is required, technicians work safely at ground level without hoisting heavy pumps out of septic pits or exposing personnel to dangerous hydrogen sulfide (H2S) gases.

The pump incorporates an oversized internal priming chamber that automatically re-primes itself without foot valves, vacuum priming systems, or external water priming lines. After the initial manual prime, the pump re-primes automatically in seconds, drawing sewage from wet-wells located up to 7.6 meters below pump centerline. The semi-open two-vane ductile iron impeller easily passes spherical solids up to 76mm (3 inches) along with fibrous rags, mud, and sand. A heavy removable inspection cleanout plate on the front of the casing allows operators to clear accidental blockages in under 3 minutes without unbolting suction or discharge piping.

The rotating assembly is sealed with a severe-duty cartridge mechanical seal with silicon carbide faces running in an oil reservoir. Staged at the Erbil Heavy Plant Yard, Baghdad Central Depot, and Basra Port Hub, Indus supplies bare-shaft self-priming pumps, electric motor skids, mobile road-trailer diesel pump sets, and full EN 10204 3.1 inspection certification.

Technical & Procurement FAQs

What is the operational advantage of self-priming pumps over submersible pumps in Iraq?

Self-priming pumps sit on dry ground above the sewage sump. Technicians can perform oil checks, clearance adjustments, and unclogging in clean conditions in minutes without using crane trucks to pull pumps out of deep sewage pits, dramatically lowering ongoing municipal maintenance costs.

How does the quick-remove cleanout cover work if a clog occurs?

The front cleanout cover is secured with two handwheel clamp knobs. By unscrewing the knobs, the cover plate swings off, giving direct visual and hand access to the impeller eye to remove rags or stones in under 3 minutes without unbolting any pipes.

Are mobile trailer-mounted diesel trash pump units available?

Yes. Indus manufactures mobile trailer-mounted diesel trash pump units equipped with tow hitches, road lighting, sound-attenuated canopies, and quick-camlock suction/discharge hoses for rapid municipal emergency bypass across all Iraqi governorates.

Engineering Search Tags & Material Index:
# self priming trash pump iraq # sewage bypass pump baghdad # dry well sewage pump erbil # diesel trash pump mobile trailer basra # solids handling water pump dn100 dn150 # suction lift sewage pump # indus self priming pumps tender
B2B Corporate Procurement

Commercial Quotation Desk

Pricing: Commercial Quote on Demand (RFQ) Official factory pricing for verified projects & tenders.
Classification Hierarchy:
• Division: Water & Wastewater
• Category: End-Suction Water Pumps
• Reference: IND-PRD-000101
Related Solution Specifications

Other Master Solutions in End-Suction Water Pumps

#52

Horizontal End-Suction Centrifugal Water Pumps (DN32–DN300, ISO 2858 / EN 733, 1.1 kW–200 kW)

⚡ DN32–DN300, ISO 2858 / EN 733, 1.1 kW–200 kW
Inspect Technical Datasheet →
#53

Axially Split-Case Double-Suction High-Flow Water Pumps (DN150–DN800, 37 kW–800 kW, ISO 9905)

⚡ DN150–DN800, 37 kW–800 kW, ISO 9905
Inspect Technical Datasheet →
#99

Vertical In-Line High-Pressure Multistage Booster Pumps (DN25–DN150, 0.75 kW–75 kW, SS304/SS316)

⚡ DN25–DN150, 0.75 kW–75 kW, SS304/SS316
Inspect Technical Datasheet →
#100

Diesel Engine Driven Emergency Water Supply & Booster Pump Skid Packages (DN80–DN300, 50 kW–350 kW)

⚡ DN80–DN300, 50 kW–350 kW
Inspect Technical Datasheet →
Official Corporate Inquiry

Request a Technical Quotation (RFQ)

Our Central Engineering & Procurement Desk in Erbil, Baghdad, and Basra will process this specification and return an official tender offer within 24 business hours.

🔒 Official Corporate Record. Confidential procurement protocol.