Indus Industrial Group supplies heavy-duty Motorized Electric Actuator Resilient Seated Gate Valves engineered across nominal diameters from DN100 to DN1000 in pressure classes PN10, PN16, and PN25 according to EN 1074-1/2, EN 1171, and ISO 5210 standards. Equipped with smart multi-turn electric actuators (Auma, Rotork, or Indus intelligent actuator series) operating on 400V 3-phase 50Hz electrical supply with IP68 waterproof enclosures, these automated valves feature non-intrusive programming, digital position transmitters (4–20mA), Modbus/Profibus fieldbus communication, and manual declutchable handwheels. Engineered for remote SCADA control in pump stations, water treatment plants, and urban distribution hubs across Iraq.
| Pricing Verification | Commercial Quote on Demand (RFQ) |
| Governing Standards | EN 1074-1/2 / EN 1171 / ISO 5210 / IEC 60034 / EN 60529 |
| Nominal Diameter Range | DN100 to DN1000 (Metric Flanged to EN 1092-2) |
| Pressure Classes | PN10, PN16, PN25 (Bar) |
| Actuator Supply Voltage | 400V AC ±10%, 3-Phase, 50 Hz (220V 1-Phase optional) |
| Enclosure Protection | IP68 Submersible (15m water depth for 72 hours) |
| Operating Temperature | -20°C to +70°C (Desert climate high-ambient certified) |
| Control Interfaces | 4–20mA Analog, Open/Close Volt-Free Contacts, Modbus RTU, Profibus |
| Valve Body Material | Ductile Iron EN-GJS-500-7 with Fusion-Bonded Epoxy (≥250 µm) |
| Manual Override | Declutchable Handwheel with Safety Interlock |
| Operating Stroke Time | Configurable 30 to 180 seconds (Anti-water hammer opening) |
| Sector & Division | Water & Wastewater (Div 01) |
| Parent Category | Resilient Gate Valves |
SCADA-controlled municipal pump stations, water treatment plant intake and discharge manifolds, automated reservoir level control, emergency pipeline burst isolation, and district metered area automated zoning across Baghdad, Erbil, Basra, Sulaymaniyah, and Najaf.
Motorized Electric Actuator Resilient Seated Gate Valves represent the essential automation technology for modern computerized water distribution networks, automated pump stations, and SCADA-controlled water treatment plants across Iraq. In major municipal utilities in Baghdad, Erbil, Basra, and Karbala, manual valve operation in distant or hazardous chambers is slow, labor-intensive, and impossible during emergency pipe burst events. Indus motorized gate valves allow control room operators to open, close, or throttle water transmission lines instantly via remote telemetry commands, drastically reducing reaction times and preventing catastrophic flood damage.
The mechanical valve is cast from high-grade spheroidal graphite ductile iron (EN-GJS-500-7) with a vulcanized EPDM resilient wedge delivering 100% bubble-tight bi-directional shutoff (Rate A per ISO 5208). The electric actuator is coupled via an ISO 5210 machined mounting flange and incorporates an oil-bath lubricated planetary reduction gear train, electronic torque sensors, and thermal motor protection. The actuator enclosure is certified IP68 (watertight up to 15 meters for 72 hours), operating reliably even if underground valve vaults become flooded with groundwater.
Featuring a non-intrusive infrared or Bluetooth local programming display, operators can set travel limits, torque shutoff thresholds, and operating speeds without opening electrical terminal compartments in dusty Iraqi desert environments. Staged at the Erbil Heavy Plant Yard, Baghdad Central Depot, and Basra Port Hub, Indus supplies complete motorized valve packages with factory bench testing, wiring diagrams, and full EN 10204 3.1 inspection certification.
The intelligent actuator features programmable operating speeds and multi-step closing profiles. During closing, it travels rapidly through the first 80% of stroke and decelerates slowly through the final 20%, ensuring gentle wedge seating that completely prevents hydraulic water hammer shockwaves.
Yes. Every actuator incorporates a mechanical handwheel with a manual declutch lever. Operators can open or close the valve by hand during power blackouts; as soon as electrical power is restored, the motor automatically re-engages and takes over control.
Yes. Indus stocks complete actuators, replacement electronic control boards, torque sensor modules, and power contactors at our Erbil, Baghdad, and Basra facilities with technical field commissioning engineers available nationwide.
