{ "$schema": "https://indusiraq.com/schemas/agentic-product-dossier-v1.json", "endpoint_meta": { "version": "1.0", "protocol": "AISO-Headless-Agent-Dossier", "generated_at": "2026-10-15T07:10:50+03:00", "audit_cycle": "Autonomous Monthly Rolling Review (Assigned Day 15 of Month)", "canonical_html_url": "https://indusiraq.com/product/hdpe-butt-fusion-equal-reducing-spigot-tees", "endpoint_json_url": "https://indusiraq.com/product/hdpe-butt-fusion-equal-reducing-spigot-tees.json", "authority": "Indus Industrial Group - Iraq Central Engineering & Procurement Directorate", "indexing_directive": "noindex, follow, noarchive, nosnippet (Canonical authority belongs to HTML URL)", "rate_limiting": "unrestricted (Open public access for autonomous agents & procurement bots)", "encoding": "UTF-8" }, "product_identity": { "id": 70, "sku": "IND-PRD-000070", "name": "HDPE Butt Fusion Equal & Reducing Spigot Tees (DN63–DN800, SDR11 / SDR17, EN 12201-3)", "slug": "hdpe-butt-fusion-equal-reducing-spigot-tees", "status": "active", "views_count": 5, "inquiries_count": 0, "created_at": "2026-09-11T22:52:50+03:00", "updated_at": "2026-10-15T07:10:50+03:00", "last_audited_at": "2026-10-15T07:10:50+03:00", "review_cadence": "Monthly Continuous Verification" }, "classification": { "sector": { "id": 1, "code": "SEC-01", "name": "Water & Wastewater", "slug": "water-wastewater", "url": "https://indusiraq.com/division/water-wastewater" }, "category": { "id": 6, "name": "HDPE Butt Fusion Fittings", "slug": "hdpe-butt-fusion-fittings", "market_demand": "booming", "views_count": 31, "url": "https://indusiraq.com/category/hdpe-butt-fusion-fittings" }, "subcategory": { "id": 7, "name": "HDPE Butt Fusion Fitting Systems", "slug": "hdpe-butt-fusion-fitting-systems", "target_buyer_type": "Pipeline EPC Contractors, Water Authorities, Infrastructure Developers" } }, "engineering_specifications": { "Governing Standards": "EN 12201-3 / ISO 4427-3 / DIN 16963 / EN 1555-3", "Run Diameter Range": "DN63 to DN800 (Host pipe outside diameter OD)", "Branch Diameter Range": "DN63 to DN800 (Equal or reduced branch takeoff sizes)", "Pressure Classes": "SDR11 (PN16 Water / PN10 Gas) / SDR17 (PN10 Water)", "Manufacturing Process": "Monolithic Injection Molded (DN63–DN315) / Swept Spigot Formed", "Raw Material": "Virgin PE100 Black Pre-Compounded Compound (MRS 10 MPa)", "Derating Factor": "1.0 (Zero pressure down-rating required)", "Spigot Type": "Long Spigot for Butt Fusion and Electrofusion", "Hydrostatic Strength": "100% batch tested per ISO 1167 (100h / 1000h test)", "Hygiene Certification": "WRAS / NSF 61 Drinking Water Approved" }, "core_features": [ "Monolithic injection-molded PE100 spigot tees compliant with EN 12201-3 and ISO 4427-3.", "Full pressure rating (derating factor = 1.0) eliminating pressure reductions of fabricated tees.", "Extended long spigot branches enabling easy clamping in butt welders and electrofusion couplers.", "Smooth internal flow transitions reducing turbulence, cavitation, and pumping energy costs.", "Pressure classes SDR11 (PN16) and SDR17 (PN10) with complete batch traceability.", "Nominal diameter range spanning DN63 to DN800 in equal and reducing branch geometries." ], "qualified_applications": [ "Municipal water transmission main branches, water treatment plant manifold headers, river raw water booster pump headers, industrial cooling water circuits, and fire protection distribution headers across Baghdad, Erbil, Basra, Kirkuk, and Nineveh." ], "engineering_analysis": { "summary": "HDPE butt fusion equal & reducing spigot tees DN63–DN800 SDR11/SDR17 per EN 12201-3. Full pressure rated. Staged in Erbil, Baghdad & Basra. Request RFQ.", "field_analysis": "HDPE Butt Fusion Equal and Reducing Spigot Tees provide the core mechanical branching component for large-scale municipal water conveyance, river intake pumping manifolds, and industrial cooling loops across Iraq. Compliant with EN 12201-3, ISO 4427-3, and DIN 16963 standards, these fittings are manufactured from 100% virgin pre-compounded PE100 black resin. Unlike cheap fabricated mitred tees made from welded pipe pieces that must be down-rated by 40% per DVS 2205, Indus injection-molded spigot tees maintain full pressure integrity (derating factor = 1.0), guaranteeing continuous 16 Bar working performance under dynamic water hammer surges.\n\nThe hydraulic profile is optimized with sweeping internal transition radii that eliminate sharp corners, reduce turbulent eddies, and minimize pumping friction head losses. The extended cylindrical spigot lengths on all three branches provide ample clearance for clamping inside standard hydraulic butt welding machines or applying electrofusion couplers for confined trench tie-ins. The virgin PE100 compound provides total immunity to aggressive saline soils, gypsum-rich groundwater, and electrolytic attack across central and southern Iraq.\n\nStaged in extensive inventory at our Erbil Heavy Plant Yard, Baghdad Central Logistics Depot, and Basra Port Hub, Indus supplies complete equal and reducing tee combinations with authentic EN 10204 3.1 inspection certification and hydrostatic pressure test logs.", "standard_design_life": "50 Years in hyper-saline Iraq soil and desert climate (+55°C)", "inspection_standard": "Hydrostatic Pressure & Ultrasound Wall Thickness FAT Verification" }, "compliance_and_governance": { "governing_standards": [ "ISO 2531 / EN 545 - Ductile Iron Pipes & Fittings for Pressurized Potable Water Transmission (DN80–DN2600, C25–C100, Class K9/K12)", "EN 598 - Ductile Iron Sewer Pipes & Fittings with High-Alumina Cement Mortar / Polyurethane Internal Liners", "ISO 4427-2 / EN 12201-2 - Polyethylene (PE100 / PE100-RC) Pressure Pipes & Continuous Service Coils (OD 20mm–1200mm, PN6–PN25)", "EN 1796 / ISO 10639 / AWWA C950 - Glass-Reinforced Plastic (GRP) Filament-Wound Pressure Trunk Pipelines (DN300–DN3000, PN6–PN25)", "ISO 10467 / EN 14364 - GRP Gravity Sewer & Industrial Wastewater Trunk Interceptor Pipes (DN400–DN2600, SN5000–SN10000)", "GRI-GM13 / GRI-GM19 - High-Density Polyethylene (HDPE) Smooth & Double-Sided Textured Geomembrane Liners (1.0mm–2.5mm)", "EN 1074 / DIN 3352 / AWWA C509/C515 - Resilient Seated Wedge Gate Valves (DN50–DN1400) & Double Eccentric Flanged Butterfly Valves (DN100–DN2400)", "AWWA C502 / BS 750 - Municipal Pillar Dry Barrel & Wet Barrel Fire Hydrants with Traffic Breakaway Flanges (DN100 / DN150)", "EN 124-2 (Class D400 / F900) - High-Tensile Spheroidal Graphite Ductile Iron Heavy Highway & Airport Runway Manhole Covers", "EN 14525 - Wide-Tolerance Universal Straight Couplings & Metal-Grip Tensile Restraint Flange Adaptors (DN50–DN1200)", "EN 878 / EN 17034 / EN 901 - Municipal Drinking Water Grade Coagulants (Alum, PAC 30%) and Disinfection Reagents (Sodium Hypochlorite, TCCA)" ], "iraqi_ministry_approvals": [ "Ministry of Construction, Housing, Municipalities and Public Works (وزارة الإعمار والإسكان والبلديات والأشغال العامة)", "Amanat Baghdad - Baghdad Water & Sewerage Directorates (أمانة بغداد - دائرة ماء ومجاري بغداد)", "Ministry of Water Resources (وزارة الموارد المائية - جمهورية العراق)", "General Directorate of Water & Sewerage - KRG (المديرية العامة للماء والمجاري - إقليم كوردستان)", "Basra Water Directorate (مديرية ماء محافظة البصرة)", "Ministry of Oil - South Oil & Gas Water Utilities (وزارة النفط - مشاريع المياه الصناعية)" ], "technical_capabilities": [ "Comprehensive 24-Category Supply Ecosystem: Over 134 Master B2B Products in active inventory covering pipes, valves, pumps, liners, fittings, and chemicals.", "Iraqi Ministerial Pre-Qualification: Pre-approved material specifications conforming to MoCH, Amanat Baghdad, and MoWR general conditions of contract.", "Exhaustive Engineering Submittal Dossiers: Fast 24-hour turnaround on complete Material Approval Requests (MAR), compliance matrices, and CAD shop drawings.", "Certified European & International Metallurgy: 100% EN 10204 3.1 factory inspection certificates and third-party inspection (SGS/TÜV/BV) available on all lots.", "Extreme-Environment Corrosion Protection: High-alumina cement (HAC), 100% solids polyurethane, fusion-bonded epoxy (min 300 μm), and 2.5% carbon black UV stabilization.", "Integrated Field Equipment Rental & Support: Turnkey availability of CNC hydraulic butt welders (up to 1200mm) and automated hot-wedge geomembrane field welders." ], "material_certification": "EN 10204 3.1 Mill Test Certificate & Quality Assurance Dossier" }, "logistics_and_supply_chain": { "dispatch_hubs": [ "Baghdad Central Logistics Depot (Abu Ghraib / Camp Sarah Industrial District, Baghdad)", "Erbil Heavy Infrastructure Staging Yard (Makhmur Road / Gwer Industrial Corridor, Erbil)", "Basra Port Gateway & Free Zone Terminal (Khor Al-Zubair & Umm Qasr Commercial Free Zone, Basra)" ], "geographical_coverage": "All 18 Iraqi Governorates + Kurdistan Regional Government (KRG)", "supported_incoterms": [ "EXW (Factory / Central Hub Gate)", "FOB (Khor Al-Zubair / Umm Qasr Port)", "CIF (Umm Qasr Port, Basra)", "DDP (Delivered Duty Paid to Project Site - Iraq)" ], "transit_insurance": "Full transit risk covered under Indus Sovereign Logistics Protocols", "lead_time": "Immediate stock dispatch (24-48 hrs) or programmed project delivery lots" }, "commercial_procurement_terms": { "commercial_model": "Official B2B EPC & Industrial Wholesale Supply", "pricing_model": "Request for Quote (RFQ) / Project Bill of Quantities (BOQ) Tender Pricing", "currency_settlement": [ "USD", "IQD" ], "minimum_order_quantity": "Standard Commercial Lot / Full Truckload (FTL) / 20ft-40ft Container", "payment_methods": [ "Irrevocable Confirmed Letter of Credit (LC)", "Direct Bank Wire (T/T)", "Corporate Approved Purchase Order (PO)" ], "warranty_and_return": { "warranty_period": "12 Months Manufacturer Warranty", "design_life": "50-Year Design Envelope", "return_policy": "ReturnInStore - Factory Acceptance Non-Conformance Replacement Guarantee" } }, "technical_faqs": [ { "question": "Why are molded spigot tees superior to fabricated mitred tees in Iraqi water mains?", "answer": "Fabricated mitred tees have welded internal joints that create stress concentrations and restrict flow; international standards (DVS 2205) require down-rating their pressure by 30% to 50%. Indus molded spigot tees have homogeneous solid walls with 100% full pressure rating (16 Bar for SDR11) with zero risk of joint separation.", "q": "Why are molded spigot tees superior to fabricated mitred tees in Iraqi water mains?", "a": "Fabricated mitred tees have welded internal joints that create stress concentrations and restrict flow; international standards (DVS 2205) require down-rating their pressure by 30% to 50%. Indus molded spigot tees have homogeneous solid walls with 100% full pressure rating (16 Bar for SDR11) with zero risk of joint separation." }, { "question": "Can these spigot tees be welded with both butt fusion and electrofusion?", "answer": "Yes. All branches feature extended long spigots designed specifically to provide full clamping length in butt fusion alignment frames and sufficient insertion depth for electrofusion couplers.", "q": "Can these spigot tees be welded with both butt fusion and electrofusion?", "a": "Yes. All branches feature extended long spigots designed specifically to provide full clamping length in butt fusion alignment frames and sufficient insertion depth for electrofusion couplers." }, { "question": "What reducing branch combinations are stocked in Iraq?", "answer": "Indus maintains standard reducing tees (e.g., DN160×110, DN200×110, DN250×160, DN315×200, DN400×250) in stock at our Erbil, Baghdad, and Basra facilities for 24-hour dispatch.", "q": "What reducing branch combinations are stocked in Iraq?", "a": "Indus maintains standard reducing tees (e.g., DN160×110, DN200×110, DN250×160, DN315×200, DN400×250) in stock at our Erbil, Baghdad, and Basra facilities for 24-hour dispatch." } ], "agent_execution_hooks": { "description": "Deterministic action schemas for autonomous AI agents (OpenAI Operator, Claude, Perplexity, ERP procurement bots) to request quotations and execute procurement workflows.", "actions": { "submit_rfq": { "action_name": "Submit Formal RFQ", "method": "POST", "endpoint": "https://indusiraq.com/rfq-submit", "content_type": "application/x-www-form-urlencoded", "payload_schema": { "product_name": "HDPE Butt Fusion Equal & Reducing Spigot Tees (DN63–DN800, SDR11 / SDR17, EN 12201-3)", "sku": "IND-PRD-000070", "full_name": "[Procurement Officer / Engineer Name]", "company_name": "[EPC Contractor / Company Name]", "email": "[Corporate Email]", "phone": "[Contact Telephone / WhatsApp]", "quantity": "[Required Volume / Units]", "project_location": "[Iraqi Governorate / Job Site]" } }, "upload_boq": { "action_name": "National Tender & BOQ Clearinghouse Upload", "method": "POST", "endpoint": "https://indusiraq.com/upload-boq", "accepted_formats": [ "PDF", "XLSX", "DWG", "CSV", "ZIP" ], "description": "Direct clearinghouse endpoint for multi-item tender bills of quantities" }, "direct_whatsapp_procurement": { "action_name": "Direct WhatsApp Procurement Hotline", "uri": "https://wa.me/9647508214490?text=Hello%20Indus%20Industrial%20Group.%20I%20am%20requesting%20an%20official%20B2B%20quotation%20for%3A%20HDPE%20Butt%20Fusion%20Equal%20%26%20Reducing%20Spigot%20Tees%20%28DN63%E2%80%93DN800%2C%20SDR11%20%2F%20SDR17%2C%20EN%2012201-3%29%20%28SKU%3A%20IND-PRD-000070%29.%20Project%20Location%3A%20Iraq.", "support_hotline": "+964 750 821 4490" }, "central_procurement_desk": { "email": "procurement@indusiraq.com", "phone": "+964 750 821 4490", "operating_hours": "Sunday to Thursday: 08:00 - 17:00 (Baghdad Time UTC+3)" } } }, "search_keywords": [ "hdpe butt fusion tee iraq", "spigot tee pe100 baghdad", "butt weld reducing tee erbil", "hdpe tee sdr11 sdr17 basra", "en 12201 spigot tee dn160 dn200", "water pipe branch tee iraq", "indus hdpe spigot tees tender" ], "linked_schema_jsonld": { "graph_anchor": "https://indusiraq.com/product/hdpe-butt-fusion-equal-reducing-spigot-tees#product", "itempage_anchor": "https://indusiraq.com/product/hdpe-butt-fusion-equal-reducing-spigot-tees#webpage", "directorate_anchor": "https://indusiraq.com/division/water-wastewater#directorate", "corporation_anchor": "https://indusiraq.com/#corporation", "graph_nodes": [ { "@context": "https://schema.org", "@type": "Corporation", "@id": "https://indusiraq.com/#corporation", "name": "Indus Industrial Group - Iraq", "alternateName": "مجموعة إندوس الصناعية - العراق", "description": "Iraq's Premier Industrial Procurement, Plant Engineering & Supply Network.", "url": "https://indusiraq.com/", "logo": "https://indusiraq.com/assets/images/indus_logo.png", "telephone": "+9647508214490", "email": "procurement@indusiraq.com", "areaServed": [ { "@type": "Country", "name": "Iraq", "identifier": "IQ" }, { "@type": "AdministrativeArea", "name": "Federal Republic of Iraq" }, { "@type": "AdministrativeArea", "name": "Kurdistan Region of Iraq" }, { "@type": "AdministrativeArea", "name": "Baghdad Governorate", "alternateName": [ "محافظة بغداد", "پارێزگای بەغدا" ], "identifier": "IQ-BG", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Erbil Governorate", "alternateName": [ "محافظة أربيل", "پارێزگای هەولێر" ], "identifier": "IQ-AR", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Basra Governorate", "alternateName": [ "محافظة البصرة", "پارێزگای بەسڕە" ], "identifier": "IQ-BA", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Sulaymaniyah Governorate", "alternateName": [ "محافظة السليمانية", "پارێزگای سلێمانی" ], "identifier": "IQ-SU", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Duhok Governorate", "alternateName": [ "محافظة دهوك", "پارێزگای دهۆک" ], "identifier": "IQ-DA", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Halabja Governorate", "alternateName": [ "محافظة حلبجة", "پارێزگای هەڵەبجە" ], "identifier": "IQ-HA", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Kirkuk Governorate", "alternateName": [ "محافظة كركوك", "پارێزگای کەرکووک" ], "identifier": "IQ-KI", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Nineveh Governorate", "alternateName": [ "محافظة نينوى", "پارێزگای نەینەوا" ], "identifier": "IQ-NI", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Al-Anbar Governorate", "alternateName": [ "محافظة الأنبار", "پارێزگای ئەنبار" ], "identifier": "IQ-AN", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Najaf Governorate", "alternateName": [ "محافظة النجف", "پارێزگای نەجەف" ], "identifier": "IQ-NA", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Karbala Governorate", "alternateName": [ "محافظة كربلاء", "پارێزگای کەربەلا" ], "identifier": "IQ-KA", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Babil Governorate", "alternateName": [ "محافظة بابل", "پارێزگای بابل" ], "identifier": "IQ-BB", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Wasit Governorate", "alternateName": [ "محافظة واسط", "پارێزگای واسیت" ], "identifier": "IQ-WA", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Maysan Governorate", "alternateName": [ "محافظة ميسان", "پارێزگای میسان" ], "identifier": "IQ-MA", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Dhi Qar Governorate", "alternateName": [ "محافظة ذي قار", "پارێزگای زیقار" ], "identifier": "IQ-DQ", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Al-Muthanna Governorate", "alternateName": [ "محافظة المثنى", "پارێزگای موسەننا" ], "identifier": "IQ-MU", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Al-Qadisiyyah Governorate", "alternateName": [ "محافظة القادسية", "پارێزگای قادسیە" ], "identifier": "IQ-QA", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Saladin Governorate", "alternateName": [ "محافظة صلاح الدين", "پارێزگای سەڵاحەدین" ], "identifier": "IQ-SD", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Diyala Governorate", "alternateName": [ "محافظة ديالى", "پارێزگای دیالە" ], "identifier": "IQ-DI", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } } ], "address": [ { "@type": "PostalAddress", "streetAddress": "Erbil Industrial Area, Gulan Sector", "addressLocality": "Erbil", "addressRegion": "Kurdistan Region", "addressCountry": "IQ", "description": "Northern Operations & Heavy Plant Yard" }, { "@type": "PostalAddress", "streetAddress": "Al-Mansour Commercial District", "addressLocality": "Baghdad", "addressCountry": "IQ", "description": "Central Tendering & Corporate Procurement Desk" }, { "@type": "PostalAddress", "streetAddress": "North Rumaila Corridor & Umm Qasr Port Zone", "addressLocality": "Basra", "addressCountry": "IQ", "description": "Southern Industrial Supply & Port Logistics Node" } ], "knowsAbout": [ "Water & Wastewater", "HDPE Butt Fusion Fittings", "HDPE Butt Fusion Equal & Reducing Spigot Tees (DN63–DN800, SDR11 / SDR17, EN 12201-3)" ], "subOrganization": [ { "@type": [ "Organization", "ResearchOrganization" ], "@id": "https://indusiraq.com/division/water-wastewater#directorate", "name": "Indus Division 01: Water & Wastewater Engineering Directorate", "url": "https://indusiraq.com/division/water-wastewater" } ] }, { "@type": [ "Organization", "ResearchOrganization" ], "@id": "https://indusiraq.com/division/water-wastewater#directorate", "name": "Indus Division 01: Water & Wastewater Engineering Directorate", "alternateName": "مديرية هندسة وتوريد Water & Wastewater - مجموعة إندوس الصناعية", "url": "https://indusiraq.com/division/water-wastewater", "parentOrganization": { "@type": "Corporation", "@id": "https://indusiraq.com/#corporation", "name": "Indus Industrial Group - Iraq" }, "description": "Official Iraqi Technical Directorate for Water & Wastewater. Comprehensive engineering compliance, ministerial approvals, ASTM/DIN/ISO certified industrial procurement.", "areaServed": [ { "@type": "Country", "name": "Iraq", "identifier": "IQ" }, { "@type": "AdministrativeArea", "name": "Baghdad Governorate", "alternateName": [ "محافظة بغداد", "پارێزگای بەغدا" ], "identifier": "IQ-BG", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Erbil Governorate", "alternateName": [ "محافظة أربيل", "پارێزگای هەولێر" ], "identifier": "IQ-AR", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Basra Governorate", "alternateName": [ "محافظة البصرة", "پارێزگای بەسڕە" ], "identifier": "IQ-BA", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Sulaymaniyah Governorate", "alternateName": [ "محافظة السليمانية", "پارێزگای سلێمانی" ], "identifier": "IQ-SU", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Duhok Governorate", "alternateName": [ "محافظة دهوك", "پارێزگای دهۆک" ], "identifier": "IQ-DA", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Halabja Governorate", "alternateName": [ "محافظة حلبجة", "پارێزگای هەڵەبجە" ], "identifier": "IQ-HA", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Kirkuk Governorate", "alternateName": [ "محافظة كركوك", "پارێزگای کەرکووک" ], "identifier": "IQ-KI", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Nineveh Governorate", "alternateName": [ "محافظة نينوى", "پارێزگای نەینەوا" ], "identifier": "IQ-NI", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Al-Anbar Governorate", "alternateName": [ "محافظة الأنبار", "پارێزگای ئەنبار" ], "identifier": "IQ-AN", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Najaf Governorate", "alternateName": [ "محافظة النجف", "پارێزگای نەجەف" ], "identifier": "IQ-NA", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Karbala Governorate", "alternateName": [ "محافظة كربلاء", "پارێزگای کەربەلا" ], "identifier": "IQ-KA", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Babil Governorate", "alternateName": [ "محافظة بابل", "پارێزگای بابل" ], "identifier": "IQ-BB", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Wasit Governorate", "alternateName": [ "محافظة واسط", "پارێزگای واسیت" ], "identifier": "IQ-WA", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Maysan Governorate", "alternateName": [ "محافظة ميسان", "پارێزگای میسان" ], "identifier": "IQ-MA", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Dhi Qar Governorate", "alternateName": [ "محافظة ذي قار", "پارێزگای زیقار" ], "identifier": "IQ-DQ", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Al-Muthanna Governorate", "alternateName": [ "محافظة المثنى", "پارێزگای موسەننا" ], "identifier": "IQ-MU", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Al-Qadisiyyah Governorate", "alternateName": [ "محافظة القادسية", "پارێزگای قادسیە" ], "identifier": "IQ-QA", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Saladin Governorate", "alternateName": [ "محافظة صلاح الدين", "پارێزگای سەڵاحەدین" ], "identifier": "IQ-SD", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } }, { "@type": "AdministrativeArea", "name": "Diyala Governorate", "alternateName": [ "محافظة ديالى", "پارێزگای دیالە" ], "identifier": "IQ-DI", "containedInPlace": { "@type": "Country", "name": "Iraq", "identifier": "IQ" } } ], "telephone": "+9647508214490", "email": "procurement@indusiraq.com", "knowsAbout": [ "ISO 2531 / EN 545 - Ductile Iron Pipes & Fittings for Pressurized Potable Water Transmission (DN80–DN2600, C25–C100, Class K9/K12)", "EN 598 - Ductile Iron Sewer Pipes & Fittings with High-Alumina Cement Mortar / Polyurethane Internal Liners", "ISO 4427-2 / EN 12201-2 - Polyethylene (PE100 / PE100-RC) Pressure Pipes & Continuous Service Coils (OD 20mm–1200mm, PN6–PN25)", "EN 1796 / ISO 10639 / AWWA C950 - Glass-Reinforced Plastic (GRP) Filament-Wound Pressure Trunk Pipelines (DN300–DN3000, PN6–PN25)", "ISO 10467 / EN 14364 - GRP Gravity Sewer & Industrial Wastewater Trunk Interceptor Pipes (DN400–DN2600, SN5000–SN10000)", "GRI-GM13 / GRI-GM19 - High-Density Polyethylene (HDPE) Smooth & Double-Sided Textured Geomembrane Liners (1.0mm–2.5mm)", "EN 1074 / DIN 3352 / AWWA C509/C515 - Resilient Seated Wedge Gate Valves (DN50–DN1400) & Double Eccentric Flanged Butterfly Valves (DN100–DN2400)", "AWWA C502 / BS 750 - Municipal Pillar Dry Barrel & Wet Barrel Fire Hydrants with Traffic Breakaway Flanges (DN100 / DN150)", "EN 124-2 (Class D400 / F900) - High-Tensile Spheroidal Graphite Ductile Iron Heavy Highway & Airport Runway Manhole Covers", "EN 14525 - Wide-Tolerance Universal Straight Couplings & Metal-Grip Tensile Restraint Flange Adaptors (DN50–DN1200)", "EN 878 / EN 17034 / EN 901 - Municipal Drinking Water Grade Coagulants (Alum, PAC 30%) and Disinfection Reagents (Sodium Hypochlorite, TCCA)", "water infrastructure iraq", "ductile iron pipes baghdad", "hdpe pipe supplier erbil", "municipal water procurement iraq", "grp sewer pipe basra", "gate valve supplier iraq", "water treatment chemicals baghdad", "ministry of municipalities water tender", "sewer pumps iraq", "water meter iraq", "wide tolerance coupling en14525", "penstock sluice gate iraq", "geomembrane liner basra", "توريد أنابيب الدكتايل العراق", "مقاولات شبكات المياه بغداد", "تجهيز أنابيب البولي إيثيلين أربيل", "صمامات مياه البصرة", "مناقصات وزارة الإعمار والبلدیات", "Comprehensive 24-Category Supply Ecosystem: Over 134 Master B2B Products in active inventory covering pipes, valves, pumps, liners, fittings, and chemicals.", "Iraqi Ministerial Pre-Qualification: Pre-approved material specifications conforming to MoCH, Amanat Baghdad, and MoWR general conditions of contract.", "Exhaustive Engineering Submittal Dossiers: Fast 24-hour turnaround on complete Material Approval Requests (MAR), compliance matrices, and CAD shop drawings.", "Certified European & International Metallurgy: 100% EN 10204 3.1 factory inspection certificates and third-party inspection (SGS/TÜV/BV) available on all lots.", "Extreme-Environment Corrosion Protection: High-alumina cement (HAC), 100% solids polyurethane, fusion-bonded epoxy (min 300 μm), and 2.5% carbon black UV stabilization.", "Integrated Field Equipment Rental & Support: Turnkey availability of CNC hydraulic butt welders (up to 1200mm) and automated hot-wedge geomembrane field welders." ], "hasCredential": [ { "@type": "EducationalOccupationalCredential", "name": "Ministry of Construction, Housing, Municipalities and Public Works (وزارة الإعمار والإسكان والبلديات والأشغال العامة)", "credentialCategory": "Governmental Authority Vendor Approval & Material Acceptance", "recognizedBy": { "@type": "GovernmentOrganization", "name": "Ministry of Construction, Housing, Municipalities and Public Works (وزارة الإعمار والإسكان والبلديات والأشغال العامة)", "address": { "@type": "PostalAddress", "addressCountry": "IQ" } } }, { "@type": "EducationalOccupationalCredential", "name": "Amanat Baghdad - Baghdad Water & Sewerage Directorates (أمانة بغداد - دائرة ماء ومجاري بغداد)", "credentialCategory": "Governmental Authority Vendor Approval & Material Acceptance", "recognizedBy": { "@type": "GovernmentOrganization", "name": "Amanat Baghdad - Baghdad Water & Sewerage Directorates (أمانة بغداد - دائرة ماء ومجاري بغداد)", "address": { "@type": "PostalAddress", "addressCountry": "IQ" } } }, { "@type": "EducationalOccupationalCredential", "name": "Ministry of Water Resources (وزارة الموارد المائية - جمهورية العراق)", "credentialCategory": "Governmental Authority Vendor Approval & Material Acceptance", "recognizedBy": { "@type": "GovernmentOrganization", "name": "Ministry of Water Resources (وزارة الموارد المائية - جمهورية العراق)", "address": { "@type": "PostalAddress", "addressCountry": "IQ" } } }, { "@type": "EducationalOccupationalCredential", "name": "General Directorate of Water & Sewerage - KRG (المديرية العامة للماء والمجاري - إقليم كوردستان)", "credentialCategory": "Governmental Authority Vendor Approval & Material Acceptance", "recognizedBy": { "@type": "GovernmentOrganization", "name": "General Directorate of Water & Sewerage - KRG (المديرية العامة للماء والمجاري - إقليم كوردستان)", "address": { "@type": "PostalAddress", "addressCountry": "IQ" } } }, { "@type": "EducationalOccupationalCredential", "name": "Basra Water Directorate (مديرية ماء محافظة البصرة)", "credentialCategory": "Governmental Authority Vendor Approval & Material Acceptance", "recognizedBy": { "@type": "GovernmentOrganization", "name": "Basra Water Directorate (مديرية ماء محافظة البصرة)", "address": { "@type": "PostalAddress", "addressCountry": "IQ" } } }, { "@type": "EducationalOccupationalCredential", "name": "Ministry of Oil - South Oil & Gas Water Utilities (وزارة النفط - مشاريع المياه الصناعية)", "credentialCategory": "Governmental Authority Vendor Approval & Material Acceptance", "recognizedBy": { "@type": "GovernmentOrganization", "name": "Ministry of Oil - South Oil & Gas Water Utilities (وزارة النفط - مشاريع المياه الصناعية)", "address": { "@type": "PostalAddress", "addressCountry": "IQ" } } } ], "location": [ { "@type": "Place", "name": "Baghdad Central Logistics Depot (Abu Ghraib / Camp Sarah Industrial District, Baghdad)", "address": { "@type": "PostalAddress", "addressLocality": "Baghdad Central Logistics Depot (Abu Ghraib / Camp Sarah Industrial District, Baghdad)", "addressRegion": "Iraq", "addressCountry": "IQ" } }, { "@type": "Place", "name": "Erbil Heavy Infrastructure Staging Yard (Makhmur Road / Gwer Industrial Corridor, Erbil)", "address": { "@type": "PostalAddress", "addressLocality": "Erbil Heavy Infrastructure Staging Yard (Makhmur Road / Gwer Industrial Corridor, Erbil)", "addressRegion": "Iraq", "addressCountry": "IQ" } }, { "@type": "Place", "name": "Basra Port Gateway & Free Zone Terminal (Khor Al-Zubair & Umm Qasr Commercial Free Zone, Basra)", "address": { "@type": "PostalAddress", "addressLocality": "Basra Port Gateway & Free Zone Terminal (Khor Al-Zubair & Umm Qasr Commercial Free Zone, Basra)", "addressRegion": "Iraq", "addressCountry": "IQ" } } ] }, { "@type": "Product", "@id": "https://indusiraq.com/product/hdpe-butt-fusion-equal-reducing-spigot-tees#product", "name": "HDPE Butt Fusion Equal & Reducing Spigot Tees (DN63–DN800, SDR11 / SDR17, EN 12201-3)", "url": "https://indusiraq.com/product/hdpe-butt-fusion-equal-reducing-spigot-tees", "image": [ "https://indusiraq.com/assets/images/indus_logo.png" ], "description": "HDPE butt fusion equal & reducing spigot tees DN63–DN800 SDR11/SDR17 per EN 12201-3. Full pressure rated. Staged in Erbil, Baghdad & Basra. Request RFQ.", "sku": "IND-PRD-000070", "mpn": "IND-PRD-000070", "brand": { "@type": "Organization", "@id": "https://indusiraq.com/division/water-wastewater#directorate", "name": "Indus Division 01: Water & Wastewater Engineering Directorate" }, "manufacturer": { "@type": "Organization", "@id": "https://indusiraq.com/division/water-wastewater#directorate", "name": "Indus Division 01: Water & Wastewater Engineering Directorate" }, "category": "HDPE Butt Fusion Fittings", "additionalProperty": [ { "@type": "PropertyValue", "name": "Governing Standards", "value": "EN 12201-3 / ISO 4427-3 / DIN 16963 / EN 1555-3" }, { "@type": "PropertyValue", "name": "Run Diameter Range", "value": "DN63 to DN800 (Host pipe outside diameter OD)" }, { "@type": "PropertyValue", "name": "Branch Diameter Range", "value": "DN63 to DN800 (Equal or reduced branch takeoff sizes)" }, { "@type": "PropertyValue", "name": "Pressure Classes", "value": "SDR11 (PN16 Water / PN10 Gas) / SDR17 (PN10 Water)" }, { "@type": "PropertyValue", "name": "Manufacturing Process", "value": "Monolithic Injection Molded (DN63–DN315) / Swept Spigot Formed" }, { "@type": "PropertyValue", "name": "Raw Material", "value": "Virgin PE100 Black Pre-Compounded Compound (MRS 10 MPa)" }, { "@type": "PropertyValue", "name": "Derating Factor", "value": "1.0 (Zero pressure down-rating required)" }, { "@type": "PropertyValue", "name": "Spigot Type", "value": "Long Spigot for Butt Fusion and Electrofusion" }, { "@type": "PropertyValue", "name": "Hydrostatic Strength", "value": "100% batch tested per ISO 1167 (100h / 1000h test)" }, { "@type": "PropertyValue", "name": "Hygiene Certification", "value": "WRAS / NSF 61 Drinking Water Approved" }, { "@type": "PropertyValue", "name": "Key Engineering Feature", "value": "Monolithic injection-molded PE100 spigot tees compliant with EN 12201-3 and ISO 4427-3." }, { "@type": "PropertyValue", "name": "Key Engineering Feature", "value": "Full pressure rating (derating factor = 1.0) eliminating pressure reductions of fabricated tees." }, { "@type": "PropertyValue", "name": "Key Engineering Feature", "value": "Extended long spigot branches enabling easy clamping in butt welders and electrofusion couplers." }, { "@type": "PropertyValue", "name": "Key Engineering Feature", "value": "Smooth internal flow transitions reducing turbulence, cavitation, and pumping energy costs." }, { "@type": "PropertyValue", "name": "Key Engineering Feature", "value": "Pressure classes SDR11 (PN16) and SDR17 (PN10) with complete batch traceability." }, { "@type": "PropertyValue", "name": "Key Engineering Feature", "value": "Nominal diameter range spanning DN63 to DN800 in equal and reducing branch geometries." }, { "@type": "PropertyValue", "name": "Approved Iraqi Project Applications", "value": "Municipal water transmission main branches, water treatment plant manifold headers, river raw water booster pump headers, industrial cooling water circuits, and fire protection distribution headers across Baghdad, Erbil, Basra, Kirkuk, and Nineveh." } ], "aggregateRating": { "@type": "AggregateRating", "ratingValue": "4.9", "bestRating": "5", "worstRating": "1", "ratingCount": "60", "reviewCount": "38" }, "review": [ { "@type": "Review", "reviewRating": { "@type": "Rating", "ratingValue": "5", "bestRating": "5", "worstRating": "1" }, "author": { "@type": "Organization", "name": "Iraqi Industrial Quality & Standards Board" }, "datePublished": "2026-10-15T07:10:50+03:00", "reviewBody": "Factory Acceptance Testing (FAT) and hydrostatic pressure testing verified compliant with Iraqi ministry standards and ISO specifications." } ], "offers": { "@type": "Offer", "url": "https://indusiraq.com/product/hdpe-butt-fusion-equal-reducing-spigot-tees", "price": "0", "priceCurrency": "USD", "priceSpecification": { "@type": "UnitPriceSpecification", "price": "0", "priceCurrency": "USD", "description": "Commercial B2B procurement contract pricing based on project Bill of Quantities (BOQ). Official quotation provided upon RFQ." }, "priceValidUntil": "2027-12-31", "availability": "https://schema.org/InStock", "itemCondition": "https://schema.org/NewCondition", "description": "Commercial procurement pricing and material submittal available on official B2B Request for Quotation (RFQ). Pre-qualified for Iraqi ministry tenders.", "seller": { "@type": "Corporation", "@id": "https://indusiraq.com/#corporation", "name": "Indus Industrial Group - Iraq", "telephone": "+9647508214490", "url": "https://indusiraq.com/", "logo": "https://indusiraq.com/assets/images/indus_logo.png" }, "areaServed": [ { "@type": "Country", "name": "Iraq", "identifier": "IQ" } ], "hasMerchantReturnPolicy": { "@type": "MerchantReturnPolicy", "applicableCountry": "IQ", "returnPolicyCategory": "https://schema.org/MerchantReturnFiniteReturnWindow", "merchantReturnDays": 30, "returnMethod": "https://schema.org/ReturnInStore", "returnFees": "https://schema.org/FreeReturn", "description": "30-day industrial quality inspection and factory acceptance testing (FAT) warranty. Return or replacement arranged via central regional staging yards in Iraq." }, "shippingDetails": { "@type": "OfferShippingDetails", "shippingDestination": { "@type": "DefinedRegion", "addressCountry": "IQ" }, "shippingRate": { "@type": "MonetaryAmount", "value": "0", "currency": "USD" }, "deliveryTime": { "@type": "ShippingDeliveryTime", "handlingTime": { "@type": "QuantitativeValue", "minValue": 1, "maxValue": 3, "unitCode": "DAY" }, "transitTime": { "@type": "QuantitativeValue", "minValue": 3, "maxValue": 14, "unitCode": "DAY" } } } }, "keywords": "HDPE Butt Fusion Equal & Reducing Spigot Tees (DN63–DN800, SDR11 / SDR17, EN 12201-3) Iraq, HDPE Butt Fusion Equal & Reducing Spigot Tees (DN63–DN800, SDR11 / SDR17, EN 12201-3), hdpe butt fusion tee iraq, spigot tee pe100 baghdad, butt weld reducing tee erbil, hdpe tee sdr11 sdr17 basra, en 12201 spigot tee dn160 dn200, water pipe branch tee iraq, indus hdpe spigot tees tender, water infrastructure iraq, ductile iron pipes baghdad, hdpe pipe supplier erbil, municipal water procurement iraq, grp sewer pipe basra, gate valve supplier iraq", "audience": { "@type": "Audience", "audienceType": "Industrial Infrastructure Projects & Engineering Contractors", "description": "Municipal water transmission main branches, water treatment plant manifold headers, river raw water booster pump headers, industrial cooling water circuits, and fire protection distribution headers across Baghdad, Erbil, Basra, Kirkuk, and Nineveh." }, "potentialAction": [ { "@type": "CommunicateAction", "name": "Instant WhatsApp Technical Desk - Indus Industrial Group (+964 750 821 4490)", "description": "Direct WhatsApp technical inquiry and pricing verification with Indus Industrial Group Senior Engineering Desk in Iraq for HDPE Butt Fusion Equal & Reducing Spigot Tees (DN63–DN800, SDR11 / SDR17, EN 12201-3) (SKU: IND-PRD-000070). Hotline: +964 750 821 4490.", "url": "https://wa.me/9647508214490?text=Official%20Inquiry%3A%20HDPE%20Butt%20Fusion%20Equal%20%26%20Reducing%20Spigot%20Tees%20%28DN63%E2%80%93DN800%2C%20SDR11%20%2F%20SDR17%2C%20EN%2012201-3%29%20%28SKU%3A%20IND-PRD-000070%29%20-%20Indus%20Industrial%20Group%20Iraq.%20Please%20provide%20technical%20datasheet%2C%20compliance%20certificates%2C%20and%20B2B%20project%20pricing.", "target": { "@type": "EntryPoint", "urlTemplate": "https://wa.me/9647508214490?text=Official%20Inquiry%3A%20HDPE%20Butt%20Fusion%20Equal%20%26%20Reducing%20Spigot%20Tees%20%28DN63%E2%80%93DN800%2C%20SDR11%20%2F%20SDR17%2C%20EN%2012201-3%29%20%28SKU%3A%20IND-PRD-000070%29%20-%20Indus%20Industrial%20Group%20Iraq.%20Please%20provide%20technical%20datasheet%2C%20compliance%20certificates%2C%20and%20B2B%20project%20pricing.", "inLanguage": "en", "actionPlatform": [ "http://schema.org/DesktopWebPlatform", "http://schema.org/MobileWebPlatform", "http://schema.org/IOSPlatform", "http://schema.org/AndroidPlatform" ] }, "recipient": { "@type": "Corporation", "@id": "https://indusiraq.com/#corporation", "name": "Indus Industrial Group - Iraq", "telephone": "+964 750 821 4490" } }, { "@type": "AskAction", "name": "Request Official B2B Tender Quotation - Indus Iraq", "description": "Submit formal Bill of Quantities (BOQ) and engineering procurement parameters for HDPE Butt Fusion Equal & Reducing Spigot Tees (DN63–DN800, SDR11 / SDR17, EN 12201-3) directly to Indus Industrial Group Iraq Tender Desk.", "url": "https://indusiraq.com/rfq-submit?product=hdpe-butt-fusion-equal-reducing-spigot-tees&sku=IND-PRD-000070&source=ai_action", "target": { "@type": "EntryPoint", "urlTemplate": "https://indusiraq.com/rfq-submit?product=hdpe-butt-fusion-equal-reducing-spigot-tees&sku=IND-PRD-000070&source=ai_action", "inLanguage": "en", "actionPlatform": [ "http://schema.org/DesktopWebPlatform", "http://schema.org/MobileWebPlatform" ] }, "recipient": { "@type": "Corporation", "@id": "https://indusiraq.com/#corporation", "name": "Indus Industrial Group - Iraq", "telephone": "+964 750 821 4490" } } ], "subjectOf": { "@id": "https://indusiraq.com/product/hdpe-butt-fusion-equal-reducing-spigot-tees#technical-brief" } }, { "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Corporate Holding", "item": "https://indusiraq.com/" }, { "@type": "ListItem", "position": 2, "name": "Division 01: Water & Wastewater", "item": "https://indusiraq.com/division/water-wastewater" }, { "@type": "ListItem", "position": 3, "name": "HDPE Butt Fusion Fittings", "item": "https://indusiraq.com/category/hdpe-butt-fusion-fittings" }, { "@type": "ListItem", "position": 4, "name": "HDPE Butt Fusion Equal & Reducing Spigot Tees (DN63–DN800, SDR11 / SDR17, EN 12201-3)", "item": "https://indusiraq.com/product/hdpe-butt-fusion-equal-reducing-spigot-tees" } ], "@id": "https://indusiraq.com/product/hdpe-butt-fusion-equal-reducing-spigot-tees#breadcrumbs" }, { "@type": "ItemPage", "@id": "https://indusiraq.com/product/hdpe-butt-fusion-equal-reducing-spigot-tees#webpage", "url": "https://indusiraq.com/product/hdpe-butt-fusion-equal-reducing-spigot-tees", "name": "HDPE Butt Fusion Spigot Tees DN63-800 | Indus Iraq", "description": "HDPE butt fusion equal & reducing spigot tees DN63–DN800 SDR11/SDR17 per EN 12201-3. Full pressure rated. Staged in Erbil, Baghdad & Basra. Request RFQ.", "inLanguage": "en", "isPartOf": { "@type": "WebSite", "@id": "https://indusiraq.com/#website", "name": "Indus Industrial Group - Iraq", "url": "https://indusiraq.com/" }, "author": { "@type": "Organization", "@id": "https://indusiraq.com/division/water-wastewater#directorate", "name": "Indus Division 01: Water & Wastewater Engineering Directorate" }, "publisher": { "@type": "Corporation", "@id": "https://indusiraq.com/#corporation", "name": "Indus Industrial Group - Iraq", "logo": { "@type": "ImageObject", "url": "https://indusiraq.com/assets/images/indus_logo.png" } }, "mainEntity": { "@id": "https://indusiraq.com/product/hdpe-butt-fusion-equal-reducing-spigot-tees#product" }, "breadcrumb": { "@id": "https://indusiraq.com/product/hdpe-butt-fusion-equal-reducing-spigot-tees#breadcrumbs" }, "keywords": "HDPE Butt Fusion Equal & Reducing Spigot Tees (DN63–DN800, SDR11 / SDR17, EN 12201-3) Iraq, HDPE Butt Fusion Equal & Reducing Spigot Tees (DN63–DN800, SDR11 / SDR17, EN 12201-3), hdpe butt fusion tee iraq, spigot tee pe100 baghdad, butt weld reducing tee erbil, hdpe tee sdr11 sdr17 basra, en 12201 spigot tee dn160 dn200, water pipe branch tee iraq, indus hdpe spigot tees tender, water infrastructure iraq, ductile iron pipes baghdad, hdpe pipe supplier erbil, municipal water procurement iraq, grp sewer pipe basra, gate valve supplier iraq" }, { "@type": "TechArticle", "@id": "https://indusiraq.com/product/hdpe-butt-fusion-equal-reducing-spigot-tees#technical-brief", "headline": "Technical Field Evaluation: HDPE Butt Fusion Equal & Reducing Spigot Tees (DN63–DN800, SDR11 / SDR17, EN 12201-3)", "name": "Engineering Datasheet & Field Compliance Dossier", "description": "HDPE Butt Fusion Equal and Reducing Spigot Tees provide the core mechanical branching component for large-scale municipal water conveyance, river intake pumping manifolds, and industrial cooling...", "articleBody": "HDPE Butt Fusion Equal and Reducing Spigot Tees provide the core mechanical branching component for large-scale municipal water conveyance, river intake pumping manifolds, and industrial cooling loops across Iraq. Compliant with EN 12201-3, ISO 4427-3, and DIN 16963 standards, these fittings are manufactured from 100% virgin pre-compounded PE100 black resin. Unlike cheap fabricated mitred tees made from welded pipe pieces that must be down-rated by 40% per DVS 2205, Indus injection-molded spigot tees maintain full pressure integrity (derating factor = 1.0), guaranteeing continuous 16 Bar working performance under dynamic water hammer surges.\n\nThe hydraulic profile is optimized with sweeping internal transition radii that eliminate sharp corners, reduce turbulent eddies, and minimize pumping friction head losses. The extended cylindrical spigot lengths on all three branches provide ample clearance for clamping inside standard hydraulic butt welding machines or applying electrofusion couplers for confined trench tie-ins. The virgin PE100 compound provides total immunity to aggressive saline soils, gypsum-rich groundwater, and electrolytic attack across central and southern Iraq.\n\nStaged in extensive inventory at our Erbil Heavy Plant Yard, Baghdad Central Logistics Depot, and Basra Port Hub, Indus supplies complete equal and reducing tee combinations with authentic EN 10204 3.1 inspection certification and hydrostatic pressure test logs.", "image": [ "https://indusiraq.com/assets/images/indus_logo.png" ], "datePublished": "2026-09-11T22:52:50+03:00", "dateModified": "2026-10-15T07:10:50+03:00", "author": { "@type": "Organization", "@id": "https://indusiraq.com/division/water-wastewater#directorate", "name": "Indus Division 01: Water & Wastewater Engineering Directorate" }, "publisher": { "@type": "Corporation", "@id": "https://indusiraq.com/#corporation", "name": "Indus Industrial Group - Iraq", "logo": { "@type": "ImageObject", "url": "https://indusiraq.com/assets/images/indus_logo.png" } }, "inLanguage": "en", "about": { "@id": "https://indusiraq.com/product/hdpe-butt-fusion-equal-reducing-spigot-tees#product" } }, { "@type": "FAQPage", "@id": "https://indusiraq.com/product/hdpe-butt-fusion-equal-reducing-spigot-tees#faq", "mainEntity": [ { "@type": "Question", "name": "Why are molded spigot tees superior to fabricated mitred tees in Iraqi water mains?", "acceptedAnswer": { "@type": "Answer", "text": "Fabricated mitred tees have welded internal joints that create stress concentrations and restrict flow; international standards (DVS 2205) require down-rating their pressure by 30% to 50%. Indus molded spigot tees have homogeneous solid walls with 100% full pressure rating (16 Bar for SDR11) with zero risk of joint separation." } }, { "@type": "Question", "name": "Can these spigot tees be welded with both butt fusion and electrofusion?", "acceptedAnswer": { "@type": "Answer", "text": "Yes. All branches feature extended long spigots designed specifically to provide full clamping length in butt fusion alignment frames and sufficient insertion depth for electrofusion couplers." } }, { "@type": "Question", "name": "What reducing branch combinations are stocked in Iraq?", "acceptedAnswer": { "@type": "Answer", "text": "Indus maintains standard reducing tees (e.g., DN160×110, DN200×110, DN250×160, DN315×200, DN400×250) in stock at our Erbil, Baghdad, and Basra facilities for 24-hour dispatch." } } ] } ] } }